Requirements

Hardware

  • Windows XP (or later) host to run the SAM-BA tool
  • Power Supply shipped with the Evaluation Kit
  • USB Device Cable
  • Serial cable
  • SD card, SD card reader
  • Workstation with Ubuntu installed
  • SAM9 EK boards from Atmel
    • AT91SAM9M10-G45-EK
      9m10g45_board.png
    • For other boards, please have a look at the schematics respectively

Software

  • A serial terminal emulator (HyperTerminal or minicom, etc.) :
    Serial communication parameters 115200 8-N-1 :
    • Baud rate: 115200
    • Data:8 bits
    • Parity: None
    • Stop: 1 bit
    • Flow control: None

  • SAM-BA tool which can be downloaded from here
  • In case of debugging purpose, you also need ADB driver to connect your EK board to your PC through USB cable. For more information, see UsingAdb

DemoArchives021

We have two types of demo packages
  • All the stuffs (AT91bootstrap, Linux Kernel, Android file system) are in NAND flash
  • All the stuffs (AT91bootstrap, Linux Kernel, Android file system) are in SD card

NAND flash based

  • All binaries: AT91Bootstrap, Linux kernel, AndroidRootFS.
  • A TCL/SAM-BA script that interfaces with the SAM-BA tool to flash the demo.
  • A .bat script which launches the TCL script to flash the EK board.

SD card based


See also: FlashPreBuildDemo, PlayingWithAndroid, GettingStarted

r12 - 30 Jun 2013 - 02:59:26 - VoiceShen
 
Android4SAM

Copyright by the contributing authors. All material on the platform is the property of the contributing authors.

Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions

Atmel and others, are registered trademarks or trademarks of Atmel or its subsidiaries.This site is powered by the TWiki collaboration platform

ARM and others are registered trademarks or trademarks or ARM Ltd. Other terms and product names may be trademarks of others.

Under the terms of the Creative Commons Attribution License

Syndicate this siteRSS ATOM