Home 
Product News New SAM9 products running at 400MHz
Product News New SAM9 products running at 400MHz
Written by nat
Hits (1036) || Votes (2) || Comments (1)
Created Thursday, 01 September 2011
Last updated Thursday, 27 October 2011
| Title | New SAM9 products running at 400MHz | |||||
| Description |
The SAM9G15, SAM9G25, SAM9G35, SAM9X25 and SAM9X35 devices expand Atmel's existing ARM®-based portfolio by supporting a range of key technology features required for today's applications.
These key features include replacing SDRAM with DDR2 memory for more memory-intensive applications; NAND flash support with 24-bit ECC for reduced system cost; and more communication channels including dual 10/100 Ethernet, dual CAN and up to 3x USB ports for a variety of application requirements. Atmel has also teamed with Conexant to enable soft modem implementation on the new SAM9 devices to lower the overall bill of materials (BOM) by eliminating external components. The five new ARM926-based microcontrollers operate at up to 400MHz and the core and peripherals consume only 100mW at maximum performance. The new Atmel SAM9 devices also include an advanced graphics LCD controller with hardware acceleration for more modern user interfaces in today's industrial applications. The enhanced LCD controller includes overlays, alpha blending, image scaling, and rotating and color space conversion to enable a more intuitive interface, while offloading the CPU. | |||||
| Add links |
|
Comments
|
Written by: michaellee On:
27 October 2011
I saw the user guide of sam9g35-ek. On table 4.1 Evaluation Kit Features, shows that it can support Zigbee. And on chapter 4.3.3.13 there is an Zigbee interface on EVK for RZ600 Zigbee. But I can't find any hands on document, demo or driver for RZ600 using in SAM9G35 on the atmel web site.
|
Login to leave a comment
