PEEDI - High Speed JTAG/BDM/SWD Emulator and Flash Programmer - Development Tools

Written by office@ronetix

Hits (551) || Votes (2) || Comments (0)

Created Oct 07, 2010

Last updated Oct 03, 2011

Title

PEEDI - High Speed JTAG/BDM/SWD Emulator and Flash Programmer

Description

PEEDI is an EmbeddedICE solution that enables you to debug software running on ARM, XScale, CORTEX-M0/M3/M4/A8/A9 Power Architecture, ColdFire, Blackfin, MIPS32, AVR32 processor cores via the JTAG/BDM/SWD port. PEEDI provides the services needed to perform all debugging operations.

• Built in support for GNU gdb/Eclipse
• OS awareness for many OS: Linux, uClinux, eCos, ...
• Multi Core support – up to 4 Cores/Targets
• Automatic processor initialization on power-up and Reset
• 10/100Base Ethernet interface
• Ability to route the ARM7/ARM9/XSCALE DCC to a TCP/IP port

• Built in FLASH Programmer
- Over 900 NOR Flash devices
- Standalone FLASH programmer
- Atmel AT45DB SPI DataFlash
- NAND Flash programming with JFFS2 and YAFFS2 support DataFlash, SPI Flash devices
- telnet and serial command line interface

More details

www.ronetix.at/peedi.html

Company

http://download.ronetix.info/peedi/doc/peedi_rev.A_manual.pdf

Company contact

office@ronetix.at

Comments

There are no comments for this item

Be the first to leave a comment