Home 
Kits & Modules Open Frame Panel Starter Kit based on AT91SAM9G45
Kits & Modules Open Frame Panel Starter Kit based on AT91SAM9G45
Written by office@ronetix
Hits (175) || Votes (1) || Comments (0)
Created Oct 03, 2011
Last updated Oct 07, 2011
| Title | Open Frame Panel Starter Kit based on AT91SAM9G45 | |
| Description | The Open Frame Panel PC consists of a CPU Module PM9G45, a base board and a 7” LCD 800x480 with Touch-Screen and LED Backlight. The Touch-Display is mounted on the back side of the base board, which has exactly the same dimensions as the LCD (16.5x10.4cm). The design can be used for evaluating of the CPU Module PM9G45 as well as compact panel PC. The CPU Module is equipped with a 400 MHz ARM926EJ-S CPU, 128MiB DDR2 and 256MiB NAND Flash, which allows a smoothly running of Linux (Open Embedded and Android) or WinCE. Features at a glance: All-purpose CPU Module PM9G45: • AT91SAM9G45 Embedded MCU, 400MHz • 128MiB DDR2 • 256MiB NAND flash • DS2401 serial number chip • DataFlash or SPI Flash (optional) • 10/100 Mbps Ethernet PHY Base board: • Ethernet RJ-45 • 7” LCD with touchscreen, 800x480, 24-bit • LED backlight • Expansion LCD connector • MicroSD card slot • 4x RS232 • 1x RS232/RS485 • Expansion Header pins • USB host on type A connector • USB host/device on Micro-AB connector • I2S audio codec • Audio jacks for headphone and microphone • Power supply 5V or 9-24V • Reset, wake-up and two user defined buttons • 2x user defined LEDs • WiFi (optional) | |
| Product series | ||
| More details |
| |
| Company |
| |
| Company contact | info@ronetix.at |
Comments
There are no comments for this item
Be the first to leave a comment
Login to leave a comment
