Home 
Kits & Modules Industrial SBC based on SAM9G45/SAM9M10 Processor
Kits & Modules Industrial SBC based on SAM9G45/SAM9M10 Processor
Written by yclinda666
Hits (232) || Votes (1) || Comments (0)
Created Nov 16, 2011
Last updated Nov 17, 2011
| Title | Industrial SBC based on SAM9G45/SAM9M10 Processor | |
| Description | The SBC6845 Single board computer has 128MBytes DDR2 SDRAM, 256MBytes Nand Flash and 4MBytes Data Flash on board. It extends many hardware interfaces including serial ports, USB Hosts, CAN, RS485, Ethernet, SD card, Audio out, keypad, LCD, Touch screen and etc. The SBC6845 Single board computer is ready to run Linux 2.6.30 open source operating system and WinCE 6.0 operating system. We provide Linux source code, WinCE BSP, User Manuel and part of development tools to help customer with their own development. So the board is a stand platform ideal for evaluation and early development work. The board also has a compact and logic layout so user can use it directly for their next embedded design which can help to shorten the development time from embedded board to products. Features: - Dimensions: 106.5mm x 94mm (6-layer PCB design) - Power Supply: +12V - Power consumption: +12V@0.16A (working without LCD) - Working Temp.: -40~85°C - Humidity Range: 0% ~ 90% - Processor: Atmel AT91SAM9G45 ARM926EJ-S Core Microprocessor (compatible with AT91SAM9M10) - 64MBytes*2 DDR2 SDRAM - 256MBytes NAND Flash - 4MBytes Data Flash - Audio output port (supports playing MP3) - 2.54mm pitch 2*20-pin LCD interface - 4-wire resistive touch screen interface - Buzzer - Debug: 3-wire RS232 serial port (TTL is designable) - COM0: 3-wire TTL serial port (RS232 is designable) - COM1: 5-wire TTL serial port (RS232 is designable) - COM2: 3-wire RS485 serial port with isolation (TTL is designable) - COM3: 3-wire RS232 serial port (TTL is designable) - One CAN 2.0 interface (with power and signal isolation) - Two High-speed USB 2.0 Host ports, 480Mbps - One 10/100Mbps Ethernet port (RJ45 with LED) - One SDHC card slot (Hot plug-and-play) - One 2.54mm pitch 2*10-pin expansion interface (SPI, I2C, PWM, ADC are led out from this connector) - 6*6 matrix keypad interface (through one 2.54mm pitch 2*10-pin connector) - 16 GPIOs extended from CPU (through one 2.54mm pitch 2*10-pin connector) - 3 Keys (one for Reset and two for user defined) - Precise RTC, battery backed (user need to prepare the battery themselves, recommended Model: CR2032) - 5 LED status indicators - Supports for Linux 2.6.30 and WinCE 6.0 OS | |
| Product series | ||
| More details |
| |
| Company |
| |
| Company contact | market@embedinfo.com |
Comments
There are no comments for this item
Be the first to leave a comment
Login to leave a comment
