The SBC6000X supports extended temperature operation, and comes pre-loded with a Linux 2.6-based kernel, YAFFS filesystem, and Wince6.0 BSP.

 The SBC6000X uses Atmel's interesting AT91SAM9261 ,the AT91SAM9261 uses ARM's ARM926EJ-S core clocked at 200MHz, with 16KB each of instruction and data cache. It also boasts 16KB of on-chip SRAM and 32KB of flash, and offers an external bus interface with controllers for SDRAM, NAND Flash, and CompactFlash. Furthermore, it integrates a host of on-chip peripheral interfaces.

 The board operates from -10 to 70 degrees Celsius (without backup battery), though individual components are claimed to be "industrial grade" parts good between -40 and 85 degrees Celsius.

Specifications listed  include:
Processor -- Atmel AT91SAM9261 clocked at 200MHz @1.8V
Memory -- 2Kbit EEPROM, 64MB SDRAM, 128MB NAND,4/8Mbyte Dataflash(not fit)
1 x 10/100Mbps Ethernet
1 x RS232 serial communication port with flow control signal
1x RS232 serial communication ports with RTS and CTS signal
1 x RS232 serial communication ports, including a Debug unit
2 x USB 2.0 full-speed host port and one device port
4 x 4 Keyboard interface
Audio input and output jacks
Four channels 12-bit ADC
Expansion:
SD card slot
16 GPIO
RTC circuit with a backup battery
3.54.35.6 and 7 TFT LCD
+12V DC power input slot
On the software side, the SBC6000X comes with the U-boot 1.3.4 bootloader, a Linux 2.6.24 kernel,YAFFS filesystem, and application software.

The SBC6000X is available now, and can be ordered direct from Embest's online store,Volume discounts are also available
More details can be found here.
http://www.armkits.com/Product/sbc6000x.asp
http://www.at91.com/samphpbb/download/file.php?id=67

Embest Info&Tech Co., LTD. (China HQ)
Room 509, Luohu Science Building
#85 Taining Rd., Shenzhen, Guangdong
China 518020
Tel: 0086-755-25635656, 25636285
Fax: 0086-755-25616057
Sales Email: market@embedinfo.com or embest1sale1@yahoo.com
Support Email: support@embedinfo.com or EmbestEmbest@yahoo.com
http://www.armkits.com