Atmel website | ARM Community | AVR freaks | Technical Support
Banner
SAM9260
SAM9260
Votes (3) || Hits (3960) || Comments (2)
 

Created Wednesday, 03 February 2010
Description

 

Description

The AT91SAM9260 is based on the ARM926EJ-S processor, with 8K byte instruction and 8K byte data cache memories. It features 8K bytes of SRAM and 32K bytes of ROM with single cycle access at maximum processor or bus speed, together with an external bus interface with controllers for SDRAM and static memories including NAND Flash and CompactFlash.
Its extensive peripheral set includes USB Full Speed Host and Device interfaces, a 10/100 Base T Ethernet MAC, Image Sensor Interface, Multimedia Card Interface (MCI), Synchronous Serial Controllers (SSC), USARTs, Master/Slave Serial Peripheral Interfaces (SPI), a three-channel 16-bit Timer Counter (TC), a Two Wire Interface (TWI) and four-channel 10-bit ADC.

 

Block Diagram
SAM9260
Product Selection Table




Product Selection Table
Product Name Flash SRAM Clock Speed Package
SAM9260 N/A 2x4 Kbytes 210 MHz BGA217 / QFP208
Key Resources
Datasheet SAM9260 Datasheet
Evaluation Kit SAM9260 Evaluation Kit
Software Package SAM9260 Software Package
In-System Programmer (SAM-BA) SAM-BA
PCB Schematic Checklist AT91SAM9260 Microcontroller Series Schematic Check List
PLL Filter Calculator PLL Filter Calculator (ZIP file)
IBIS and Boundary Scan Description
Product Name QFP Package
BGA Package
IBIS BSD IBIS BSD
SAM9260 PQFP208_1v8_IBIS
PQFP208_3v3_IBIS
PQFP208_BSD LFBGA217_1v8_IBIS
LFBGA217_3v3_IBIS
LFBGA217_BSD

Comments
Written by: Tomc On 07 February 2011
SAM9260 Booting from SDCARD

How does one achieve this in the AT91SAM9260. The data sheet mentions that it can, but cannot find any other document to say how?

Have a 9260ek board to try before developing our own pcb.

Managed to get U-Boot running of Nand Flash 

Any help would be greatly appreciated.

 

Written by: zouxpxp On 06 April 2011
Uing Norflash in AT91SAM9260

I am using the AT91SAM9260-EK development board. I think there are no files with the kit for the Norflash interface. Can anyone guide how can we use Norflash?  BootStrap? download?

Login to leave a comment