Home 
Kits & Modules Embest SBC6020 AT91SAM9G20 Single Board Computer
Kits & Modules Embest SBC6020 AT91SAM9G20 Single Board Computer
Written by yclinda666
Hits (751) || Votes (1) || Comments (0)
Created Mar 03, 2010
Last updated Jul 21, 2010
| Title | Embest SBC6020 AT91SAM9G20 Single Board Computer | |
| Description | Embest SBC6020 Single Board Computer exposes all features of the AT91SAM9G20 microprocessor and supports many standard interfaces and peripheral devices including USB Host/Device, Ethernet, CAN, SPI, Serial ports, CF card slot, ADC, JTAG, GPIO, Mini-PCI interface and more over. The Mini-PCI interface has integrated SDIO, SPI, UART and USB signals. Customer can attach 3G module, GPS module, GPRS/GSM module, WiFi/Bluetooth module and other Mini-PCI devices to this interface. The board is capable of supporting Linux 2.6.30 open-source operating system. The system can boot from either Nand Flash or Nor Flash. It is pre-installed with the U-Boot boot loader. Embest provides all drivers in source code and together with user manual and some other tools and documents to help customer immediately start with their code development. It is an already device which can be used directly by customers for their embedded applications. Embest also offers customer design service based on the SBC6020 board according to customer’s requirement. Whether you need to reduce, add or modify to existing hardware, Embest will help customers with expert competence and year-long experience. Features - Dimensions: 150mm x 106mm - Power supply: +12V - Working temperature: -10~70°C - Processor: Atmel AT91SAM9G20 (ARM926EJ-STM core with MMU capable of 400MHz operation) - 64Mbyte SDRAM - 128Mbyte Nand Flash (support up to 256Mbyte, bootable) - 4Mbyte Nor Flash (bootable) - 2Kbit EEPROM - 2 10M/100M Ethernet ports - 7 serial ports (Debug: 3-wire RS232 serial port, COM0: 5-wire RS232/TTL serial port, COM1: 5-wire RS485 serial port, COM2: 5-wire RS232/TTL serial port, COM3/4/5: 3-wire RS232/TTL serial port) - 2 USB2.0 full-speed (12 Mbits/S) Host ports - 1 USB2.0 full-speed (12Mbits/S) Device port - 1-channel CAN2.0 Bus - 4-channel 10-bit ADC - RTC (battery backed) - CF card socket - Mini-PCI interface (SDIO, SPI, COM2 and USB Host are led out through this interface) - Buzzer - LEDs - 1 Reset button - Watchdog timer - 8 GPIOs (can be used as 4*4 keyboard or independent IOs) - 20-pin JTAG interface - Ready-to-Run Linux 2.6.30 OS | |
| Product series | ||
| More details |
| |
| Company |
| |
| Company contact | market@embedinfo.com |
Comments
There are no comments for this item
Be the first to leave a comment
Login to leave a comment
