The SAM9N12-EK Evaluation Kit enables rapid evaluation and code development of applications running on a SAM9N12 device. Key Features:

Atmel SAM9N12 microcontroller in BGA217 package 16 MHz crystal 32.768 KHz crystal

Memory: 1Gb DDR2 memory; 2Gb NAND Flash memory with Chip Selection control switch; Optional   NOR flash; 32Mb SPI Serial DataFlash with Chip Selection control switch; 512Kb Serial EEPROM; 1Kb 1-Wire EEPROM; SD/MMC interface

Communication: One Ethernet Physical Transceiver Layer with

The SAM3S-EK2 evaluation kit enables evaluation capabilities and code development of applications running on an SAM3S8, SAM3SD8 microcontrollers. The SAM3S-EK2 includes many hardware such as: ** SAM3SD8 chip LQFP100 package with optional socket footprint ** 12 MHz crystal ** 32.768 KHz crystal ** Optional SMB connector for external system clock input ** NAND Flash ** 2.8 inch TFT color LCD display with touch panel and backlight ** UART port with level shifter circuit ** USART port with level shifter

The AT91SAM3X-EK evaluation kit enables evaluation capabilities and code development of applications running on an SAM3X and SAM3A devices. The SAM3X-EK includes many hardware such as:

SAM3X8H LFBGA chip with optional socket footprint 12MHz crystal 32.768KHz crystal SDRAM NAND Flash Backup battery 2.8 inch TFT color LCD display with touch-panel and backlight UART port with level shifter IC USART port with level shifter IC Audio codec with input and output jacks: stereo headphone out and mono

The SAM9X35-EK Evaluation Kit enables rapid evaluation and code development of applications running on a SAM9X35 device.

The SAM9X35-EK includes many hardware peripherals such as: ** External memory support ** DDR2-SDRAM (1Gb) ** NAND Flash (2 or 4Gb) ** Three USB ports: - HS (EHCI) and FS (OHCI) Host, multiplexed with HS USB Device via Micro AB connector - HS (EHCI) and FS (OHCI) Host, via standard type A connector - FS only (OHCI) Host, via standard type A connector ** One Ethernet 10/100

The SAM9X25-EK Evaluation Kit enables rapid evaluation and code development of applications running on a SAM9X25 device.

The SAM9X25-EK includes many hardware peripherals such as: ** External memory support ** DDR2-SDRAM (1Gb) ** NAND Flash (2 or 4Gb) ** Three USB ports: - HS (EHCI) and FS (OHCI) Host, multiplexed with HS USB Device via Micro AB connector - HS (EHCI) and FS (OHCI) Host, via standard type A connector - FS only (OHCI) Host, via standard type A connector ** Two Ethernet 10/100

The SAM9G35-EK Evaluation Kit enables rapid evaluation and code development of applications running on a SAM9G35 device.

The SAM9G35-EK includes many hardware peripherals such as: ** External memory support ** DDR2-SDRAM (1Gb) ** NAND Flash (2 or 4Gb) ** Three USB ports: - HS (EHCI) and FS (OHCI) Host, multiplexed with HS USB Device via Micro AB connector - HS (EHCI) and FS (OHCI) Host, via standard type A connector - FS only (OHCI) Host, via standard type A connector ** Two Ethernet 10/100

The SAM9G25-EK Evaluation Kit enables rapid evaluation and code development of applications running on a SAM9G25 device.

The SAM9G25-EK includes many hardware peripherals such as: ** External memory support ** DDR2-SDRAM (1Gb) ** NAND Flash (2 or 4Gb) ** Three USB ports: - HS (EHCI) and FS (OHCI) Host, multiplexed with HS USB Device via Micro AB connector - HS (EHCI) and FS (OHCI) Host, via standard type A connector - FS only (OHCI) Host, via standard type A connector ** Two Ethernet 10/100

The SAM9G15-EK Evaluation Kit enables rapid evaluation and code development of applications running on a SAM9G15 device.

The SAM9G15-EK includes many hardware peripherals such as: ** External memory support ** DDR2-SDRAM (1Gb) ** NAND Flash (2 or 4Gb) ** Three USB ports: - HS (EHCI) and FS (OHCI) Host, multiplexed with HS USB Device via Micro AB connector - HS (EHCI) and FS (OHCI) Host, via standard type A connector - FS only (OHCI) Host, via standard type A connector ** Two Ethernet 10/100

The AT91SAM9M10-G45-EK Evaluation Kit AT91SAM9M10 and the AT91SAM9G45 ARM926EJ-S-based 32-bit RISC microcontroller for real-time code development and evaluation.

The SAM9M10-G45-EK includes many hardware peripherals such as: ** Two high speed USB hosts and one high speed device port ** An Ethernet 10/100 interface ** Two high speed multimedia card interfaces ** An LCD TFT display (480*RGB*272) ** A composite video output ** A camera interface ** Several communication peripherals such as: - Universal

The SAM3N Evaluation Kit (SAM3N-EK) enables evaluation capabilities and code development of applications running on a SAM3N4C device.

The SAM3N-EK includes many hardware peripherals such as: ** 32-Megabit Serial DataFlash ** 2.0 inch TFT color LCD display with backlight ** UART port with level shifter IC ** Micro SD interface ** Reset buttons: NRST ** User buttons: Left and Right ** QTouch® buttons: Left, Right, and Slider ** JTAG port ** On-board power regulation ** Two user LEDs ** Power LED ** ZigBee®