TopJTAG Probe is a boundary-scan (IEEE 1149.1 JTAG) based simple logic analyzer and circuit debugging software. It provides the ability to monitor pin values in real-time without interference with the normal operation of a working device and to interactively set up pin values for testing of board-level interconnects or on-chip internal logic.

http://www.topjtag.com/probe/

IAR J-Trace is a small ARM hardware debug trace device. It connects via USB to the PC host running Windows. IAR J-Trace integrates seamlessly into IAR Embedded Workbench for ARM and also works as a standard JTAG debugger through a separate JTAG port.

General features
• USB-driven JTAG and Trace (38-pin Mictor) interface
• Supports all ARM7 and ARM9 devices
• No power supply required, powered through USB, although external power supply plug is ...

RedBoot - Debug Agent and Bootstrap Firmware



RedBoot™ is a comprehensive debug and bootstrap firmware solution for
the development, deployment, and management of embedded devices. It
supports a wide variety of embedded application types ranging from
native stand-alone, proprietary and eCos RTOS based applications,
through to embedded Linux based systems.



RedBoot has been deployed in products from Axis, Buffalo, HP, Intel,
Linksys, ...

IAR KickStart Kit™ for Atmel AT91SAM7S contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications:

• AT91SAM7 development board
• 20-state version of visualSTATE
• IAR Embedded Workbench with a 32KB version of the IAR C/C++ Compiler
• J-LINK JTAG debugger with USB connector

IAR visualSTATE® is a set of highly sophisticated and easy-to-use development tools for designing, testing and implementing embedded applications based on state machines. It provides advanced verification and validation utilities and generates very compact C/C++ code that is 100% consistent with your system design. In addition, the new and revolutionizing integration with IAR Embedded Workbench®, a fully integrated C/C++ compiler and debugger toolset, enables true state machine debugging on ...

IAR J-Link is a small USB-JTAG/SWD hardware debug probe for ARM processors. It connects via USB to the PC host running Windows. IAR J-Link integrates seamlessly into IAR Embedded Workbench and is fully plug-and-play compatible.

Key features
• Any ARM7/ARM9/ARM11/Cortex-M3 core supported, including both JTAG and SWD.
• Download speed up to 720 KB/sec *
• DCC speed up to 800 KB/sec *
• Seamless integration into IAR Embedded ...