The SAM9N12 is an ARM926-based microprocessor running at 400MHz. Its extensive peripheral set includes an integrated graphics LCD controller that supports screen resolutions up to WVGA with 16M colors and 24bpp. In addition, it offers support for a wide range of external memories, including LPDDR/DDR2 and MLC NAND Flash with up to 24-bit ECC. The SAM9N12 features multiple communication interfaces, such as a FS USB host and device with on-chip transceivers, SD/SDIO/MMC, USARTs, SPIs, I2S and

The Atmel® SAM3A ARM® Cortex™-M3 Flash-based microcontroller (MCU) features connectivity peripherals including a dual CAN interface and high-speed USB (HS USB) MiniHost and device with on-chip physical layer (PHY)  Devices are available in a dual-bank configuration of 256KB and 512KB Flash total and in 100-pin QFP and BGA package options. The architecture is designed to support high-speed data transfers and includes a multi-layer bus matrix plus dual SRAM banks, direct memory access (DMA)

The Atmel® SAM3X ARM® Cortex™-M3 Flash-based microcontroller (MCU) brings more connectivity to the SAM3 family by adding Ethernet, dual CAN and high-speed USB (HS USB) MiniHost and device with on-chip physical layer (PHY). Devices feature a dual-bank configuration of 256KB and 512KB Flash total and are available in 100-pin and 144-pin QFP and BGA package options. The architecture is designed to support high-speed data transfers and includes a multi-layer bus matrix plus dual SRAM banks, direct

Description

Based on the powerful ARM® Cortex™-M4 processor, the Atmel® SAM4S series extends the Atmel Cortex-M portfolio to offer:
- Increased performance and power efficiency
- Higher memory densities up to 1MB of Flash and 128KB of SRAM
- And a rich peripheral set for connectivity, system control and analog interfacing.

SAM4S devices are pin-to-pin and software compatible with current SAM3 Cortex-M3-based MCUs, offering a smooth upwards migration path for performance and memory size.

The SAM4S

Description

The SAM9X35 is a highly-integrated 400 MHz ARM926 embedded MPU, featuring a rich set of connectivity and user interface peripherals, including Ethernet MAC and dual CAN. The graphics LCD controller features 4-layer overlay and 2D acceleration (picture-in-picture, alpha-blending, scaling, rotation, color conversion), and a 10-bit ADC that supports 4- or 5-wire resistive touchscreen panels.
Additional interfaces include a soft modem supporting exclusively the Conexant SmartDAA

Description

The SAM9X25 is a high-performance ARM926EJ-S-based embedded microprocessor unit, running at 400MHz and featuring multiple networking/connectivity peripherals, including two 2.0A/B compatible Controller Area Network (CAN) interfaces and two IEEE Std 802.3-compatible 10/100Mbps Ethernet MACs.
Additional communication interfaces include a soft modem, HS USB Device and Host, FS USB Host, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S, multiple TWIs and 10-bit ADC.
The SAM9X25

Description

Based on the ARM926EJ-S processor and running at 400MHz, the SAM9G35 integrates advanced user interface and high-speed communication peripherals. It features an advanced graphics LCD controller with 4-layer overlay offering picture-in-picture, alpha-blending, scaling, rotation and color conversion and a 10-bit ADC that supports 4- or 5-wire resistive touchscreen panels. Multiple communication interfaces include a soft modem supporting exclusively the Conexant SmartDAA line

Description

Based on the ARM926EJ-S core, the SAM9G25 runs at 400 MHz and features connectivity peripherals, a high data bandwidth architecture and a small footprint package option, making it an optimized solution for industrial applications. Peripherals include a soft modem supporting exclusively the Conexant SmartDAA line driver, HS (480Mbps) USB Host/Device ports and FS USB Host with on-chip transceivers, 10/100 Ethernet MAC, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S,

Description

With an ARM926EJ-S core and running at 400 MHz, the SAM9G15 integrates a graphics LCD controller with 4-layer overlay offering picture-in-picture, alpha-blending, scaling, rotation and color conversion, and a 10-bit ADC that supports 4/5-wire resistive touchscreen panels. Multiple communication interfaces include a soft modem supporting exclusively the Conexant SmartDAA line driver, HS USB Host and Device and FS USB Host with on-chip transceivers, two HS

The SAM3S16 is a new member of the Atmel® SAM3S series microcontrollers based on the high-performance 32-bit ARM® Cortex™-M3 RISC processor.
The SAM3S16 operates at a maximum speed of 100MHz and features 1MB of flash and 128KB of SRAM. The extensive peripheral set includes a FS USB device port with embedded transceiver, HS multimedia card interface for SDIO/SD/MMC,external bus interface featuring a static memory controller connecting to SRAM, PSRAM, NOR Flash, LCD module and NAND flash,

Description

The SAM3N Series intelligently combines high-performance architecture, peripherals and power–saving techniques to deliver uncompromised performance. Available in multiple memory densities, pin counts and package types, the SAM3N offers a scalable solution to meet application requirements. It is supported by a full set of software libraries, project examples, tools and a worldwide ecosystem to shorten development cycle time.

Description

The SAM3S series are 18 Cortex-M3-based Flash MCUs that integrate features to simplify PCB design and reduce power consumption down to 2.3 mW at 1 MHz operation. At maximum operating frequency of 64MHz the device consumes 1.45mW/MHz. They provide processing power and features such as system control, sensor interfaces, 64k to 256kByte Flash memory options, an optional external parallel bus interface, connectivity capabilities and user interface support. Additional features include

Description

Atmel’s SAM3U is the industry’s first Cortex-M3 Flash microcontroller with an on-chip high-speed USB Device (including transceiver) at 480 Mbps. In addition to USB, the SAM3U products come with multiple communication interfaces such as USART, SPI and I2C, as well as an external memory conHtroller, SDIO/SD/MMC controller, ADCs and timers. This connectivity, together with the SAM3U’s 96 MHz/1.25 DMIPS/MHz operating frequency, makes the SAM3U the unique Cortex-M3 device suited to

Description

The AT91SAM7X(C) is a Flash microcontroller Family with integrated Ethernet, USB and CAN interface, based on the 32-bit ARM7TDMI RISC processor. It features embedded high-speed Flash with sector lock capabilities and a security bit.
Its extensive peripheral set includes a USB 2.0 Full Speed Device Port, Ethernet MAC 10/100 base T, CAN 2.0A and 2.0B compliant Controller, USARTs, SPI, SSC, TWI and an 8-channel 10-bit ADC.

The integrated proprietary SAM-BA Boot Assistant enables

Description

The AT91SAM7A3 is a Flash microcontroller based on the 32-bit ARM7TDMI RISC processor optimized for embedded control. It features 256K bytes of embedded high-speed Flash and 32K bytes of SRAM.
Its extensive peripheral set includes two CAN 2.0B Controllers, 8-channel 20-bit PWM Controller, nine 16-bit general purpose Timers, 16-channel 10-bit ADCs, a USB 2.0 Full Speed Device Port, MCI, USARTs, SPI, SSC and TWI.

Description

The AT91SAM7L is a new series of high-performance, ultra-low power ARM7-based microcontrollers, embedding power switches controlling multiple power islands and programmable voltage regulators to reduce power consumption in active and standby modes. The SAM7L operates in single supply mode down to 1.8V and consumes 0.5mA/MHz typical in active mode when executing code out of its Flash memory. In power down mode, the AT91SAM7L consumes only a typical 100nA.

Description

The tiniest but still fully-featured products of the SAM7 family. The AT91SAM7S family is a low pincount Flash microcontroller based on the 32-bit ARM7TDMI RISC processor. It features embedded high-speed Flash with sector lock capabilities and a security bit. The integrated proprietary SAM-BA Boot Assistant enables in-system programming of the embedded Flash.

Description

The AT91SAM7SE family is a Flash microcontroller with external memory bus based on the 32-bit ARM7TDMI RISC processor. It features embedded high-speed Flash with sector lock capabilities and a security bit. The external bus interface supports SDRAM and static memories including CompactFlash and ECC-enabled NAND Flash. The integrated proprietary SAM-BA Boot Assistant enables in-system programming of the embedded Flash.

Description

The AT91RM9200 microcontroller offers a flexible configuration of on- and off-chip memories together with an extensive set of peripherals for control, communication and data storage purposes. It is based on the ARM920T 200-MIPS advanced 32-bit RISC processor with 16K byte instruction and 16K byte data cache memories. It features 16K bytes of on-chip SRAM and 128K bytes of ROM, together with an external bus interface with controllers for SDRAM and static memories including NAND

Description

The AT91SAM9XE is a new serie ARM9-based Flash microcontroller that combines a 200-MIPS ARM926EJ-S processor core with high-performance on-chip Flash. It offers an unrivalled combination of performance and functionality on a single chip, making these Flash microcontrollers ideal for space-constrained applications where high performance is required.
The SAM9XE serie provides multiple networking/connectivity options with on-chip USB 2.0 Full Speed Host and Device Ports, an Ethernet