izmit escort escort ankara adana escort

 FAQ •  Search •  Register •  Login 

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: SAMA5D2 shutdown problem
PostPosted: Wed Feb 15, 2017 12:40 am 
Offline

Joined: Wed Feb 15, 2017 12:24 am
Posts: 1
We are using the SAMA5D2 on a custom board. Our OS build is based on buildroot. When we shutdown the board with 'poweroff' or 'halt', the ACT8945A never fully shuts off the regulators. Instead the board will idle for about 5 seconds and then reboot.

I suspect the ACT8945A MSTROFF bit (register 0x01, bit 5) is never written via i2c. The MSTROFF bit tells all regulators to turnoff. Our linux build does includes the ACT8945A drivers. Recently I built the drivers as removable modules and and tried the following:

rmmod act8945a
rmmod act8945a_charger
rmmod act8945a-regulator

i2cset 0 0x5b 0x01 0x20

As expected all regulators immediately powered down.

Poweroff, halt, and shutdown work as expected on the SAMA5D2 Xplained board; I compared configs but so far nothing doing.

My assumption is the device driver should handle this. Any ideas?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: