izmit escort escort ankara adana escort

 FAQ •  Search •  Register •  Login 

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Problems with QSPI-XIP!
PostPosted: Wed Apr 12, 2017 9:19 am 
Offline

Joined: Thu Mar 16, 2017 12:30 pm
Posts: 19
I am using ATSAMA5D2B-XULT with SAMA5D27 Rev B silicon.
I built the qspi_xip example for configuration SRAM using IAR 7.60.2
When launched from the debugger, the example runs properly.I flash the example for configuration QSPI0 to QSPI0.When I try to reboot and let RomBOOT run the program, it does not run, it just prints RomBOOT.
I have used sam-ba to set QSPI0_IOSET3 and QSPI_XIP_MODE.

BSCR=0x00000005 / BUREG1,VALID
BUREG1=0x00240ffe / QSPI0_IOSET3,QSPI1_DISABLED,SPI0_DISABLED,SPI1_DISABLED,NFC_DISABLED,SDMMC0_DISABLED,SDMMC1_DISABLED,UART1_IOSET1,JTAG_IOSET1,EXT_MEM_BOOT,QSPI_XIP_MODE


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron