izmit escort escort ankara adana escort

 FAQ •  Search •  Register •  Login 

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: How to transplant android 4.4.2 to SAMA5D3X board
PostPosted: Wed Jul 05, 2017 5:17 am 
Offline

Joined: Fri Aug 12, 2016 5:17 am
Posts: 6
We use a Atmel SAMA5D3X evaluation platform MYD-SAMA5D3X to specify the way to transplant android 4.4.2 to SAMA5D3X board.

Step1: obtaining android original codes
1 $ mkdir android4sam_v4.4
2 $ cd android4sam_v4.4
3 $ repo init -u git://github.com/Android4SAM/platform_sammanifest.git -b android4sam_v4.4
4 $ repo sync

Step2: configuring android
1 $ . build/envsetup.sh
2 $ lunch sama5d3-eng
3 $ make

Step3: generating android image
1 $ mkubi_image -b sama5d3

If things goes smoothly with you, system_ubifs-SAMA5D3-ANDROID-4.4.2_r2.img and userdata_ubifs-SAMA5D3-ANDROID-4.4.2_r2.img will be generated under current catalogue. Unfortunately, if there are any problems, please refer to the details on make_android_ubifs.log

Step4: bruning the development board
Copy the img file which was generated above into one of the burned mirror Android-image's catalogue, amend and burn the control file flash_all.tcl:
……

……

## Files to load

set bootstrapFile "boot.bin"

set ubootFile "u-boot.bin"

set kernelFile "uImage"

append dtbFile $variant_name $board_suffix ".dtb"

set rootfsFile "rootfs.ubi"

set ubootEnvFile "ubootEnv.bin"

set systemfsFile "system_ubifs-SAMA5D3-ANDROID-4.4.2_r2.img"

set datafsFile "userdata_ubifs-SAMA5D3-ANDROID-4.4.2_r2.img"

if {! [file exists $dtbFile]} {

puts "-E- === Unknown $variant_name + board $board_suffix combination ==="

exit

}

## NandFlash Mapping

set bootStrapAddr 0x00000000

set ubootAddr 0x00040000

set ubootEnvAddr 0x000c0000

set dtbAddr 0x00180000

set kernelAddr 0x00200000


set systemfsAddr 0x01000000

set datafsAddr 0x0A000000

……

……

puts "-I- === Enable trimffs ==="

NANDFLASH::NandSetTrimffs 1

puts "-I- === Load the android system file system ==="

send_file {NandFlash} "$systemfsFile" $systemfsAddr 0

puts "-I- === Load the android data file system ==="

send_file {NandFlash} "$datafsFile" $datafsAddr 0


puts "-I- === DONE. ==="

Step5: firing android

Please remember to start-up android after burned and amend uboot environment variables
1 U-Boot> setenv filesys_env 'ubi.mtd=1 ubi.mtd=2 root=ubi0:system rootfstype=ubifs init=/init androidboot.hardware=sama5-ek androidboot.console=ttyS0'
2 U-Boot> setenv nand_args 'run bootargs_defaults
3 U-Boot> setenv bootargs ${bootargs} no_console_suspend mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,144M(system),80M(userdata) ${filesys_env}'
4 U-Boot> saveenv
5 U-Boot> boot


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: