izmit escort escort ankara adana escort

 FAQ •  Search •  Register •  Login 

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: LCD for at91sam9x35 with 320x240 resolution
PostPosted: Thu Aug 31, 2017 6:34 am 
Offline

Joined: Mon Aug 14, 2017 9:36 am
Posts: 10
I have AT91SAM9X35 [CORE9X35] SOM and Linux 3.6.9 , there is LCD port to which i want to connect 320x240 18bit LCD with RGB mode.

There is default 800x480 resolution so i want to change this to 240x320 & 320x240.
Code:
# cat /sys/class/graphics/fb0/virtual_size
800,480


I tried to change boot command form

Code:
bootargs=console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw video=800x480-16@60


to
Code:
bootargs=console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw video=240x320-16@60


But

Code:
#cat /sys/class/graphics/fb0/virtual_size
640,480


So my LCD and Resistive Touch screen dose not work properly.

Is this method correct to set resolution for LCD?
Dose Linux support 240x320 & 320x240 resolutions?
How can i Set resolution to resistive Touch Screen?


Top
 Profile  
Reply with quote  
 Post subject: Re: LCD for at91sam9x35 with 320x240 resolution
PostPosted: Fri Sep 08, 2017 8:05 am 
Offline

Joined: Mon Aug 14, 2017 9:36 am
Posts: 10
For touch screen I have Tried to build tslib for at91sam9x5, I have build with same toolchian as i have build qt , kernel , and other c codes.

i have successfully build tslib but after deployment on target , i got following error.

Code:
./ts_calibrate
Inconsistency detected by ld.so: dl-deps.c: 622: _dl_map_object_deps: Assertion `nlist > 1' failed!


is this toolchain problem or something i m missing?


Top
 Profile  
Reply with quote  
 Post subject: Re: LCD for at91sam9x35 with 320x240 resolution
PostPosted: Sat Sep 09, 2017 7:14 am 
Offline

Joined: Mon Aug 14, 2017 9:36 am
Posts: 10
problem resolved for tslib build.

I followed this link-

https://sourceforge.net/p/net-snmp/mailman/message/31654245/

removed all lib files for Qt and tslib and then copied only required lib files for tslib.

Still struggling for changing lcd display resolution to 320x240 / 240x320.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: