|
Hi.
I have AT91SAM9M10-EKES board.
I manged to run the android demo provided. and now I'm trying to make it run linux with BuildRoot as described in the Linux4SAM web page, using the Buildroot generic rootfs for SAM9EK boards.
Linux loads and then hangs while shouting:
Kernel panic - not syncing: No init found.
I saw several posts over the net regarding this issue, but didn't see any solution to the problem, did anyone encountered such a thing ?
Log:
......
Creating 5 MTD partitions on "atmel_nand":
0x000000000000-0x000000500000 : "Bootstrap"
0x000000500000-0x000006400000 : "ramdisk"
0x000006400000-0x00000a400000 : "userdata"
0x00000a400000-0x00000e000000 : "cache"
0x00000e000000-0x000010000000 : "test"
atmel_spi atmel_spi.0: Atmel SPI Controller at 0xfffa4000 (irq 14)
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
atmel-ehci atmel-ehci: Atmel EHCI UHP HS
atmel-ehci atmel-ehci: new USB bus registered, assigned bus number 1
atmel-ehci atmel-ehci: irq 22, io mem 0x00800000
atmel-ehci atmel-ehci: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Atmel EHCI UHP HS
usb usb1: Manufacturer: Linux 2.6.30 ehci_hcd
usb usb1: SerialNumber: atmel-ehci
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
at91_ohci at91_ohci: AT91 OHCI
at91_ohci at91_ohci: new USB bus registered, assigned bus number 2
at91_ohci at91_ohci: irq 22, io mem 0x00700000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: AT91 OHCI
usb usb2: Manufacturer: Linux 2.6.30 ohci_hcd
usb usb2: SerialNumber: at91
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
atmel_usba_udc atmel_usba_udc: MMIO registers at 0xfff78000 mapped at c886e000
atmel_usba_udc atmel_usba_udc: FIFO at 0x00600000 mapped at c8900000
android init
android_bind
mass_storage_function_add
usb_ep_autoconfig for fsg bulk_in got ep1
usb_ep_autoconfig for fsg bulk_out got ep2
android_usb gadget: Number of LUNs=1
adb_function_add
usb_ep_autoconfig for adb ep_in got ep3
usb_ep_autoconfig for adb ep_out got ep4
android_usb gadget: android_usb ready
mice: PS/2 mouse device common for all mice
input: gpio-keys as /devices/platform/gpio-keys/input/input0
atmel_tsadcc atmel_tsadcc: Master clock is set at: 133333333 Hz
atmel_tsadcc atmel_tsadcc: Prescaler is set at: 82
input: atmel touch screen controller as /devices/platform/atmel_tsadcc/input/inp
ut1
rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0
IRQ 1/rtc0: IRQF_DISABLED is not guaranteed on shared IRQs
rtc-at91sam9 at91_rtt.0: rtc0: SET TIME!
i2c-gpio i2c-gpio.0: using pins 52 (SDA) and 53 (SCL)
Linux video capture interface: v2.00
atmel_isi atmel_isi: Reading configuration
atmel_isi atmel_isi: video buffer: 614400 bytes at ff7f1000 (phys 77000000)
atmel_isi atmel_isi: video buffer: 614400 bytes at ff887000 (phys 77100000)
atmel_isi atmel_isi: video buffer: 614400 bytes at ff91d000 (phys 77200000)
atmel_isi atmel_isi: capture buffer: 962560 bytes at ff706000 (phys 0x77b00000)
atmel_isi atmel_isi: Atmel ISI V4L2 device at 0xfffb4000
ac ===0
battery===0
Registered led device: d8
Registered led device: d6
Registered led device: d7
at_hdmac at_hdmac: Atmel AHB DMA Controller ( cpy slave ), 8 channels
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
Advanced Linux Sound Architecture Driver Version 1.0.20.
atmel_ac97c atmel_ac97c.0: Atmel AC97 controller at 0xc8898000, irq = 24
ALSA device list:
#0: Atmel AC97 controller
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
rtc-at91sam9 at91_rtt.0: hctosys: unable to read the hardware clock
atmel_mci atmel_mci.0: Using dma0chan0 for DMA transfers
atmel_mci atmel_mci.0: Atmel MCI controller at 0xfff80000 irq 11, 1 slots
atmel_mci atmel_mci.1: Using dma0chan1 for DMA transfers
atmel_mci atmel_mci.1: Atmel MCI controller at 0xfffd0000 irq 29, 1 slots
VFS: Mounted root (jffs2 filesystem) on device 31:2.
Freeing init memory: 148K
Warning: unable to open an initial console.
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
[<c0033c70>] (unwind_backtrace+0x0/0xdc) from [<c0045524>] (panic+0x58/0x11c)
[<c0045524>] (panic+0x58/0x11c) from [<c002d514>] (init_post+0xc8/0xf0)
[<c002d514>] (init_post+0xc8/0xf0) from [<c0008710>] (kernel_init+0xb4/0xdc)
[<c0008710>] (kernel_init+0xb4/0xdc) from [<c0048360>] (do_exit+0x0/0x648)
[<c0048360>] (do_exit+0x0/0x648) from [<00000003>] (0x3
|
Forum
