Hi

We got linux on our AT91SAM9260-EK running now with loading the RFS from a SD card. We formatted the card with ext2 and then put the rootfs.arm.ext2 image on it. So far everything works fine.
But somehow the changes we make on the filesystem aren't saved. Next time we boot the board, the filesystem looks fresh again, all our changes, like new folders, are gone.
This may be a basic linux problem, but we ain't got so much knowledge yet, our first real project using linux. So any help is appreciated.

hello, I try also to put my filesystem on a SD (or MMC). I ha ve at91sam9260-ek but when I don't know how to use this card.
For the moment I have a rootfs on NFS and when I plug my card it does nothing ...

Could you help me please if you have already try this ???

Pierre


Sorry for my english ...

Hi!

Try to run "sync" command before resetting the board. You should also unmount your device.

-Heikki

Hi psa,

Have you checked to make sure you have compiled SD Card support in your kernel? It may not be enabled by default... (I have 9261EK, so I don't know about 9260EK).

Thanks for your help,
but now I found my errors and it works !!!!