OE Kernel from linux4sam on at91sam9263ek

limpens · **Joined:** Sun Sep 02, 2007 1:39 pm **Posts:** 77

Hi, I'm trying to get follow the steps from linux4sam to run my own rebuild kernel etc.

I notice the defconfig files for the 9260ek and 9261ek have their filesystem non-modulair (cramfs=y and jffs2_fs=y) but the 9263ek has jffs2_fs=m

In the 9263ek, EXT2_FS=y however.

Please correct me if wrong, but shouldn't it be CONFIG_JFFS2_FS=y and CONFIG_EXT2_FS=m ?

I'm now having trouble mounting my rootfs

limpens · **Joined:** Sun Sep 02, 2007 1:39 pm **Posts:** 77

limpens wrote:

Please correct me if wrong, but shouldn't it be CONFIG_JFFS2_FS=y and CONFIG_EXT2_FS=m ?

I'm now having trouble mounting my rootfs

I've rebuild the kernel with JFFS2_FS non-modulair and the kernel is now able to mount the root filesystem.

Sincerely, Eric.

nferre · **Joined:** Wed Feb 14, 2007 11:17 am **Posts:** 67

limpens wrote:

I notice the defconfig files for the 9260ek and 9261ek have their filesystem non-modulair (cramfs=y and jffs2_fs=y) but the 9263ek has jffs2_fs=m

I see in defconfig page : http://www.linux4sam.org/twiki/pub/Linux4SAM/LinuxKernel/at91sam9263ek_defconfig
CONFIG_JFFS2_FS=y

limpens · **Joined:** Sun Sep 02, 2007 1:39 pm **Posts:** 77

nferre wrote:

limpens wrote:

I notice the defconfig files for the 9260ek and 9261ek have their filesystem non-modulair (cramfs=y and jffs2_fs=y) but the 9263ek has jffs2_fs=m

I see in defconfig page : http://www.linux4sam.org/twiki/pub/Linux4SAM/LinuxKernel/at91sam9263ek_defconfig
CONFIG_JFFS2_FS=y

You're right, that config is completely different from mine.
I've done a mtn checkout of the revision, mentioned on your site, applied the patch and assumed the OE setup was properly configured.

Maybe the wiki isn't quite clear in configuring the kernel when using OE.

OE Kernel from linux4sam on at91sam9263ek

Who is online