Dear All,

We are few friends, built an Arm9 board with at91rm9200+epson s1d13506 and we had "inspired" from at91rm9200EK board. Now we would like to port linux to this board and we are totally stucked, we don't know where to start. But thanks God we found this board and there are many useful information. We are looking a guide to tell us where to start and what should we load to board and how to build a configuration file. We are completely clueless.
Sorry for my english and i hope i'm not opening a wrong placed message.
Thanks in advance,

Analyzer

PS. Here is our board scheme :
http://www.4shared.com/file/38026731/ea ... 00_32.html

Hi,

Any clues?

Analyzer

Hi all,

This is our project from Turkey. Now, we will port linux and u-boot.
We will first load u-boot, then linux. But, we don't know which file to modify.


Here's some pict.
(we will give gerber file later.)