Corrupt text loading kernel

shodgson · **Joined:** Tue Apr 29, 2008 4:17 pm **Posts:** 2

I'm trying to load the example kernel from Linux4SAM into an AT91SAM9260, everything seems to work OK, apart from the status text for the kernel is corrupted.

My board has 8Mb RAM and 4Mb of Atmel Dataflash.

Any ideas what I might be doing wrong? I'm fairly sure it's the normal output you'd see when linux boots, only corrupted, as it stops and starts whilst it loads.

Thanks

Simon

Code:

U-Boot> bootm 0x20012000
## Booting image at 20012000 ...
   Image Name:   linux-2.6
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1440676 Bytes =  1.4 MB
   Load Address: 20008000
   Entry Point:  20008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux............................................................
..................................
done, booting the kernel.
Ã Ã¼Ã Ã¼Ã¼Ã Ã¼Ã Ã Ã Ã¼Ã Ã¼Ã Ã Ã Ã Ã¼Ã Ã Ã Ã¼Ã Ã¼Ã Ã¼Ã¼Ã¼Ã¼Ã¼Ã Ã¼Ã Ã Ã Ã Ã¼Ã Ã Ã¼Ã Ã Ã Ã¼Ã Ã¼Ã Ã¼Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã¼Ã Ã¼Ã 
Ã Ã Ã Ã Ã¼Ã Ã Ã Ã Ã Ã¼Ã¼Ã Ã Ã¼Ã¼Ã Ã Ã Ã Ã Ã¼Ã¼Ã Ã Ã Ã Ã Ã Ã Ã Ã¼Ã¼Ã Ã Ã Ã Ã Ã¼Ã Ã¼Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã¼Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã¼
Ã Ã Ã Ã Ã Ã¼Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã¼Ã Ã¼Ã¼Ã Ã Ã Ã¼Ã Ã Ã Ã Ã¼Ã¼Ã Ã Ã Ã¼Ã¼Ã Ã Ã¼Ã Ã Ã Ã¼Ã¼Ã Ã Ã¼Ã Ã Ã Ã¼Ã Ã¼Ã Ã Ã Ã Ã¼Ã¼Ã Ã 
Ã Ã Ã Ã¼Ã Ã Ã Ã Ã Ã Ã Ã Ã¼Ã¼Ã¼Ã Ã Ã¼Ã¼Ã Ã¼Ã Ã¼Ã Ã Ã¼Ã¼Ã¼Ã Ã Ã Ã Ã Ã¼Ã Ã Ã Ã Ã¼Ã Ã¼Ã Ã¼Ã Ã Ã Ã¼Ã¼Ã Ã Ã Ã¼Ã¼Ã¼Ã¼Ã Ã¼Ã Ã Ã Ã 
Ã Ã Ã¼Ã Ã Ã Ã¼Ã Ã¼Ã Ã Ã¼Ã Ã Ã¼Ã¼Ã Ã¼Ã¼Ã¼Ã¼Ã¼Ã Ã¼Ã Ã Ã Ã Ã Ã¼Ã Ã¼Ã Ã¼Ã¼Ã¼Ã¼Ã Ã Ã¼Ã Ã Ã Ã Ã¼Ã Ã Ã¼Ã Ã¼Ã¼Ã¼Ã¼Ã¼Ã Ã¼Ã Ã Ã Ã¼Ã 
Ã Ã Ã Ã¼Ã Ã Ã Ã¼Ã Ã¼Ã Ã Ã Ã Ã Ã Ã Ã¼Ã Ã Ã Ã¼Ã Ã¼Ã Ã Ã Ã¼Ã¼Ã Ã Ã Ã Ã¼Ã Ã Ã¼Ã Ã¼Ã Ã¼Ã Ã Ã Ã Ã Ã¼Ã Ã Ã¼Ã¼Ã Ã Ã¼Ã Ã¼Ã Ã¼Ã Ã¼Ã 
Ã Ã Ã Ã¼Ã Ã¼Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã¼Ã Ã Ã Ã Ã¼Ã¼Ã Ã¼Ã Ã¼Ã Ã¼Ã Ã Ã¼Ã Ã Ã 

Corrupt text loading kernel

Who is online