Home 
Forum
Forum
| Welcome to AT91SAM Community Forum http://www.at91.com/samphpbb/ |
|
| gadget ethernet problem http://www.at91.com/samphpbb/viewtopic.php?f=12&t=4666 |
Page 1 of 1 |
| Author: | ARMed_and_? [ Mon Jul 07, 2008 2:54 pm ] |
| Post subject: | gadget ethernet problem |
Hi, I'm trying to get the gadget ethernet (g_ether module) interface working between a winXP host and my h/w that is VERY similar to an AT91SAM9260EK board. kernel is 2.6.24.4 I install the module w/ modprobe g_ether /var/log/messages contains: Dec 31 17:18:54 at91sam9260dfc user.warn kernel: ether gadget: using random self ethernet address Dec 31 17:18:54 at91sam9260dfc user.warn kernel: ether gadget: using random host ethernet address Dec 31 17:18:54 at91sam9260dfc user.info kernel: usb0: Ethernet Gadget, version: May Day 2005 Dec 31 17:18:54 at91sam9260dfc user.info kernel: usb0: using at91_udc, OUT ep2 IN ep1 STATUS ep4 Dec 31 17:18:54 at91sam9260dfc user.info kernel: usb0: MAC b6:ab:51:d4:6d:76 Dec 31 17:18:54 at91sam9260dfc user.info kernel: usb0: HOST MAC 96:97:eb:70:a3:e8 Dec 31 17:18:54 at91sam9260dfc user.info kernel: usb0: RNDIS ready Dec 31 17:19:23 at91sam9260dfc user.debug kernel: usb0: suspend Dec 31 17:19:23 at91sam9260dfc user.debug kernel: usb0: resume Dec 31 17:19:23 at91sam9260dfc user.debug kernel: usb0: suspend Dec 31 17:19:23 at91sam9260dfc user.debug kernel: usb0: setup complete --> 0, 16/18 Dec 31 17:22:38 at91sam9260dfc user.debug kernel: usb0: qlen 2 Dec 31 17:22:38 at91sam9260dfc user.info kernel: usb0: full speed config #2: 100 mA, Ethernet Gadget, using RNDIS Dec 31 17:22:38 at91sam9260dfc user.debug kernel: usb0: eth_reset_config Dec 31 17:22:38 at91sam9260dfc user.debug kernel: usb0: setup complete --> 0, 16/18 Dec 31 17:22:38 at91sam9260dfc user.debug kernel: usb0: qlen 2 Dec 31 17:22:38 at91sam9260dfc user.info kernel: usb0: full speed config #2: 100 mA, Ethernet Gadget, using RNDIS Dec 31 17:22:43 at91sam9260dfc user.debug kernel: usb0: suspend XP begins installing the driver linux.inf but then stops w/ This device cannot start (Code 10) Can anyone help me with this? Regards, Joe |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
