Hi,

I am trying to get the g_ether module working between an AT91SAM9260 and XP host. I can't have it working on the XP side. I have 'The driver can't start (code 10)'. I have used the linux.inf driver available under Documentation/usb/.

Here is some log on the Linux side:
ether gadget: using random self ethernet address
ether gadget: using random host ethernet address
usb0: Ethernet Gadget, version: May Day 2005
usb0: using at91_udc, OUT ep2 IN ep1 STATUS ep4
usb0: MAC 26:ca:60:ec:7c:82
usb0: HOST MAC 86:a3:22:dc:8e:ab
usb0: RNDIS ready
usb0: suspend
usb0: resume
usb0: suspend
usb0: setup complete --> 0, 16/18
usb0: qlen 2
usb0: full speed config #2: 100 mA, Ethernet Gadget, using RNDIS
usb0: eth_reset_config
usb0: setup complete --> 0, 16/18
usb0: qlen 2
usb0: full speed config #2: 100 mA, Ethernet Gadget, using RNDIS
usb0: suspend

Any idea what's going on ?

Thanks.
~Olivier