Home 
Forum
Forum
| Welcome to AT91SAM Community Forum http://www.at91.com/samphpbb/ |
|
| USB Device Firmware Upgrade (DFU) handler http://www.at91.com/samphpbb/viewtopic.php?f=12&t=639 |
Page 1 of 1 |
| Author: | Mike Crowe [ Mon Apr 18, 2005 3:20 pm ] |
| Post subject: | USB Device Firmware Upgrade (DFU) handler |
Is the DFU protocol a standard? If so, I have found a Linux DFU (usbdfu.c) module for the at76c503 that might work. It would need to be modified with new firmware data. I was just curious if other changes needed to be applied to get this work or whether I needed to start from scratch. Thanks |
|
| Author: | pfilippi [ Mon Apr 18, 2005 9:49 pm ] |
| Post subject: | |
Hi Mike, yes the DFU is a standard. Go to www.usb.org, then enter DFU in the search field. Regarding DFU for Linux, see this post http://www.at91.com/www/phpBB2/viewtopic.php4?t=65 This should help you. Regards, |
|
| Author: | Mike Crowe [ Tue Apr 19, 2005 10:57 pm ] |
| Post subject: | |
Looked good. Downloaded compiled and ran without issues on 2.6 kernel. Haven't tested it yet as I don't have by boards yet. Thanks for the reply |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
