WinCE 6.0 image download hangs up

Noufele · **Joined:** Tue Oct 27, 2009 6:10 am **Posts:** 4

Hello,
I am trying to run WinCE 6.0 Demo on my At91SAM9260 EK without success. The image is downloaded but is not started. The process hangs up. The Debug Output is showing:
PD Debugger The Kernel Debugger is waiting to connect with target.
What is wrong? Please Help

Thanks

Regards

Noufele

Adeneo · **Posted:** Fri Oct 30, 2009 5:19 pm

Hello,

I suppose you are using KITL (debug build or release with KITL). If yes, you must know that KITL has its own Ethernet driver which enter in conflict with the Ethernet driver of the BSP.
So, if you are using KITL then remove the Ethernet component from your image.

Hope this help

Noufele · **Joined:** Tue Oct 27, 2009 6:10 am **Posts:** 4

Hello Adeneo,
thanks you. Know it works.

I have another problem. I am trying to make the example program that uses GPIO Driver to switch LED on/off work. Visual Studio cannot find the include files ("AT91SAM9260.h", "AT91SAM9260_gpio.h", "atmel_gpio_struct.h", "AT91SAM926x_gpio_ioctl.h"). where are those files?

Thanks

Noufele

guangyu.ren · **Joined:** Tue Mar 31, 2009 7:22 am **Posts:** 23

You can find these files in BSP code and they located under PLATFORM\COMMON\SRC\SOC\ATMEL.

WinCE 6.0 image download hangs up

Who is online