Welcome to AT91SAM Community Forum :: View topic - Conflicts between AT91SAM9M10EK BSP and AT91SAM9263EK BSP

Welcome to AT91SAM Community Forum http://www.at91.com/samphpbb/

Conflicts between AT91SAM9M10EK BSP and AT91SAM9263EK BSP http://www.at91.com/samphpbb/viewtopic.php?f=13&t=19330	Page 1 of 1

Author:	johnxliu [ Fri Jun 25, 2010 6:03 pm ]
Post subject:	Conflicts between AT91SAM9M10EK BSP and AT91SAM9263EK BSP
If both the BSP for AT91SAM9M10EK and the BSP for AT91SAM9263EK are installed, the compilation for projects based on AT91SAM9M10EK will fail for there are both sources and dirs in PLATFORM\COMMON\SRC\SOC\ATMEL\COMMON\DRIVERS\LCDC directory.

Author:	Adeneo [ Mon Jun 28, 2010 11:11 am ]
Post subject:	Re: Conflicts between AT91SAM9M10EK BSP and AT91SAM9263EK BSP
Hi johnxliu, When you work with different versions of BSP, the best solution is to install each one in separate folders instead of the WinCE600\Platform folder. After, to generate images, you must use junction mechanism on NTFS (with 'junction.exe' or more friendly with 'NTFS Link') to deceive WinCE. With this trick, you can easily switch between BSP's. Here, at Adeneo-Embedded, we use it everyday. HTH If this answer solves your problem, please edit the subject of this post by adding [Solved] at the beginning of the subject.

Page 1 of 1	All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/