Home 
Forum
Forum
| Welcome to AT91SAM Community Forum http://www.at91.com/samphpbb/ |
|
| "Application explorer.exe encountered a serious error" http://www.at91.com/samphpbb/viewtopic.php?f=13&t=19376 |
Page 1 of 1 |
| Author: | saran6elex [ Mon Jul 12, 2010 11:52 am ] |
| Post subject: | "Application explorer.exe encountered a serious error" |
Hi guys, Our company is developing a ATSAM9G45 based on Windows CE 6.0.I have Created the WINCE 6.0 image and loaded to the board thereafter when i try to open any of the folder(My Device,etc) on the device, get an error message saying : "Application explorer.exe encountered a serious error and must be shut down" and some time i am getting "Application servicesD.exe encountered a serious error and must be shut down" afterthen system is going to reboot or hanging. We experienced the same error occuring in Images built separately on two development machines with the R3 Plaform installed. please anyone help us to solve this issue...  Thanks in advance.. Saravanan.A |
|
| Author: | Adeneo [ Tue Jul 20, 2010 2:44 pm ] |
| Post subject: | Re: "Application explorer.exe encountered a serious error" |
Hi saran6elex, We never encountered this sort of problem. Do you have the same issue with the AT91SAM9G45EK board? Do you have installed all QFE's? Best regards. |
|
| Author: | saran6elex [ Wed Jul 21, 2010 1:53 pm ] |
| Post subject: | Re: "Application explorer.exe encountered a serious error" |
Hi, We have used below tools for our WINCE 6.0 OS development, IDE : Visual Stdio 2005,service pack 1 Platform Builder : Windows Embedded CE 6.0,service pack 1,R2,R3. BSP : AT91SAM9G45_v1.4.0 Standard BSP is working fine with ATSAM9G45EK board,But our requirement is to display the GUI in CRT monitor,So we have made changes from TFT mode to CRT mode in the display driver file(C:WINCE600PLATFORMAT91SAM9G45M10EKSRCDRIVERSDisplayGraphicChip_AT91SAM9G45M10EK.reg) of your AT91SAM9G45_v1.4.0 BSP.There after only we got Error on debug terminal "Exception data Abort(4)". We have noticed two bad sectors in our NAND flash,but Evl board no bad sectors. Will it make any difference while loading the image to the RAM? Here i am giving memory Status taken from WINCE board, Memory load : 49% total physical memory : 26100kb Available physical memory : 13444kb page file size : 0 kb Available page file size : 0 kb Total Virtual memory : 1048576kb Available Virtual memory : 1042752kb Store pages : 6524 Ram Pages : 6525 Page size : 4096 bytes Please help us to reslove this issue Thanks, Saravanan.A |
|
| Author: | Adeneo [ Tue Aug 10, 2010 11:53 am ] |
| Post subject: | Re: "Application explorer.exe encountered a serious error" |
Hi saran6elex, Some Nand devices may have bad blocks and some other not. The Nand driver manages these bad blocks and the data are not write in bad blocks. For your customization issue, if you need help, please contact our sales service at sales.emea@adeneo-embedded.com HTH If this answer solves your problem, please edit the subject of this post by adding [Solved] at the beginning of the subject. |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
