Home 
Forum
Forum
| Welcome to AT91SAM Community Forum http://www.at91.com/samphpbb/ |
|
| SAMBA-WINCE http://www.at91.com/samphpbb/viewtopic.php?f=13&t=19485 |
Page 1 of 1 |
| Author: | ompuneet_2911 [ Wed Aug 18, 2010 5:31 pm ] |
| Post subject: | SAMBA-WINCE |
Hello All, I need to debug WINCE image NK.bin using SAMBA, does anyone know how can I use SAMBA for debugging purposes? Thanks, -Puneet |
|
| Author: | Adeneo [ Tue Aug 24, 2010 8:30 am ] |
| Post subject: | Re: SAMBA-WINCE |
Hi, SAM-BA is not a debugging tool. It's goal is only programming. You need to use Visual Studio 2005 for debugging the kernel and the drivers or a JTAG probe with a debugger tool to debug the bootloaders. HTH If this answer solves your problem, please edit the subject of this post by adding [Solved] at the beginning of the subject. |
|
| Author: | ompuneet_2911 [ Tue Aug 24, 2010 5:35 pm ] |
| Post subject: | Re: SAMBA-WINCE |
Thanks for your reply. I was wondering if you could suggest a JTAG debugger to debug the Kernel. We are using AT91SAM9260 and it seems to crash while initializing the Kernel. Reducing down the Core frequency from 200Mhz to 180Mhz seems to make the image work (probably some timing issue), any suggestions? Thanks for your help -Puneet |
|
| Author: | Adeneo [ Mon Aug 30, 2010 1:41 pm ] |
| Post subject: | Re: SAMBA-WINCE |
Hi, You can use SAM-ICE from ATMEL or RealView from Arm. For the frequency issue, it happens on eval board (EK) or on your own board? HTH If this answer solves your problem, please edit the subject of this post by adding [Solved] at the beginning of the subject. |
|
| Author: | ompuneet_2911 [ Mon Aug 30, 2010 5:35 pm ] |
| Post subject: | Re: SAMBA-WINCE |
Hello, We are using AT91SAM9260 on our board with WINCE i.e. we use MS Visual Studio. I could not find any info to use SAM-ICE with MS Visual Studio...? Can RealView be used for ATMEL? Frequency issue is happening on our board...please let me know if there is anything I could try... Thanks, -Puneet |
|
| Author: | Adeneo [ Wed Sep 01, 2010 11:34 am ] |
| Post subject: | Re: SAMBA-WINCE |
Hi, Unfortunately, SAM-ICE is not compatible with VS. To use a probe in VS, it must be compliant with EXDI2 like the RealView, but it is not easy to be used... For your frequency issue, you can look at the RAM/Flash timings. HTH If this answer solves your problem, please edit the subject of this post by adding [Solved] at the beginning of the subject. |
|
| Author: | ompuneet_2911 [ Mon Sep 13, 2010 8:56 pm ] |
| Post subject: | Re: SAMBA-WINCE |
Thanks for your reply. Changing DRAM settings did not seem to make any difference. Can SAM-BA be used to debug Linux kernel? Thanks, -Puneet |
|
| Author: | Adeneo [ Fri Sep 24, 2010 12:11 pm ] |
| Post subject: | Re: SAMBA-WINCE |
HI, I don't know if SAM-BA can be used as a debugger on Linux (I don't think so). HTH If this answer solves your problem, please edit the subject of this post by adding [Solved] at the beginning of the subject. |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
