Hello,

we're changing the OS of our 32Mb Ram device from WinCE5 to WinCE6.

Running WinCE5, the system did only use 5Mb of Ram.
Running WinCE6, the system is now using 10Mb of Ram.

Our application, running on this system, needs a lot of Ram.
So, how can I increase the amount of available Ram on the CE6 system,
without removing drivers (which are still needed)?

Hopefully, someone knows something. Thanks.

Hi ,

Please take a look at this web page:
http://msdn.microsoft.com/en-us/library/ee482768.aspx
It gives information about how to share the RAM between storage and application.

HTH,

If this answer solves your problem, please edit the subject of this post by adding [Solved] at the beginning of the subject.