Hi,

I've just get the WinCE 6.0 R2 binary BSP from the FTP site.
To test WinCE capcity I simply want to trigger an hardware interuption and count...
Is there any chainable interupt in the binary bsp to wich I can hook, or must I get the BSP sources and create a device driver to do so ?

Cheers.

Hi,

I don't really understand what you want to do?
What do you mean by chainable interrupt?

On WinCe you can implement Installable ISR, which overwrite the standard ISR for one IRQ, but you can use the standard ISR too.
Do you know which interrupt source you want to use?

With the Binary BSP you can easily create a new driver which configures the interrupt and counts each time the interrupt has been triggered.

Regards

Yes it what I've done in fact.
Thanks

Hi, I want to write device driver for manage gpio and I want to see small example.
Can you write this or give me link to exaamle.
Platform: AT91SAM9263-EK
BSP: evalution from adeneo ftp

Thanks

censored



_____________________________________________________

[font=Arial]12530[/font][font=Arial] [/font][font=Arial]12530[/font][font=Arial] [/font][font=Arial]fj.12530[/font][font=Arial] [/font][font=Arial]bj12530[/font]