I use pb4.2 to build wince4.2.net,but at the end of the compiling
failed calling bin2xip.exe D:\WINCE420\PUBLIC\H2410\RelDir\SAMSUN~1\chain.bin D:\WINCE420\PUBLIC\H2410\RelDir\SAMSUN~1\privkey.dat
makeimg: Check for D:\WINCE420\PUBLIC\H2410\RelDir\SAMSUN~1\PostRomImage.bat to run.
makeimg: Change directory to D:\WINCE420.
makeimg: run command: cmd /C D:\WINCE420\PUBLIC\H2410\RelDir\SAMSUN~1\PostRomImage.bat romimage D:\WINCE420\PUBLIC\H2410\RelDir\SAMSUN~1\ce.bib
makeimg: Check for D:\WINCE420\PUBLIC\H2410\RelDir\SAMSUN~1\PostMakeImg.bat to run.

H2410 - 0 error(s), 1 warning(s)
There is no nk.bin file generated,why pb can't find bin2xip.exe?
could anyone help me
Thank you!

HI,

From your build log, it seems you are targeting a Samsung platform, not an Atmel one. I suggest you'd post your query on Windows CE dedicated newsgroup (microsoft.public.windowsce.platbuilder), rather than this forum which is dedicated to Atmel solutions.

BR
----------------------------------------------------------------
Yannick Chamming's (eMVP)
ADESET (http://www.adeset.com)
Group Manager
Windows Embedded Group
<mailto:ychammings_NOSPAM@adeset.com>
Tél : +33 (0)4.72.18.57.77
Fax : +33 (0)4.72.18.57.78
----------------------------------------------------------------