Welcome to AT91SAM Community Forum :: View topic - lock bits & security bit sam7x256

Welcome to AT91SAM Community Forum http://www.at91.com/samphpbb/

lock bits & security bit sam7x256 http://www.at91.com/samphpbb/viewtopic.php?f=15&t=18917	Page 1 of 1

Author:	fjb2069 [ Wed Jan 27, 2010 7:16 pm ]
Post subject:	lock bits & security bit sam7x256
I want to protect my code, yet be able to update is via USB sam-ba without having to physically jumper ERASE PIN. It appears that if you set the Security Bit, the only way to clear it is to JUMPER the ERASE PIN at power up? Is this correct or is there some way to do it via firmware. It is ok if it requires erasing the flash in the process. ALso, the lock bits only offer erase and write protection, they do not stop reading code. Is this correct? Is there another way?

Author:	jim-lock [ Sat Mar 13, 2010 6:28 pm ]
Post subject:	Re: lock bits & security bit sam7x256
Probably there's no other way to fix that

Page 1 of 1	All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/