Home 
Forum
Forum
| Welcome to AT91SAM Community Forum http://www.at91.com/samphpbb/ |
|
| Getting started with sam3u http://www.at91.com/samphpbb/viewtopic.php?f=24&t=19074 |
Page 1 of 1 |
| Author: | bm31416 [ Wed Mar 17, 2010 4:23 pm ] |
| Post subject: | Getting started with sam3u |
Hi there, Im new in this cortex world and have some doubts. Ive just got a SAM3U-EK kit, SAM-ICE and IAR. However Im having some trouble flashing the arm with my code. Is there some configuration I have to do in the arm? or in IAR? Regards, Bruno |
|
| Author: | edi [ Fri Mar 19, 2010 12:41 pm ] |
| Post subject: | Re: Getting started with sam3u |
Hi Bruno, as far as I know there are some limitations using SAM-ICE to program the flash. Perhaps it is the problem. I do not use the IAR tools because there are limitations too (code size). Therefor I can't say something about it. I use GNU based development tools in combine with SAM-ICE. For programing the flash I use SAM-BA which is part of the ISP tools from Atmel. It should work for you too. If you want to debug your hardware you can still use the IAR toolchain. First burn the image into the flash using SAM-BA, disable the DOWNLOAD item (located somewhere in the debugger settings for the given project) and start debugging. Best regards, Edi |
|
| Author: | bm31416 [ Tue Mar 23, 2010 4:57 pm ] |
| Post subject: | Re: Getting started with sam3u |
Problem solved! In case another mate get same problem. I tried to make a full new project, without any previous setting from atmel. But actually there are 3 files which should be used. Linker File: flash.icf Debug File: flash.mac Flash Loader They can be found in any example project from atmel: http://www.atmel.com/dyn/products/tools ... ol_id=4343 |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
