-I- Waiting ...
-I- TCL platform : Windows NT
-I- SAM-BA 2.9  on : windows
-I- Retrieved arguments from command line :
-I- argv 0 : \usb\ARM0
-I- argv 1 : AT91SAM9G45-EK
-I- argv 2 : at91sam9g45ekes_demo_linux_nandflash.tcl
-I- Connection : \usb\ARM0 (target(comType) = 0)
-I- Board : at91sam9g45-ek
-I- Traces Level : 4
-I- target(handle) : 18015848
Read device Chip ID at 0xfffff240 --- get 0x00000000
Read device Chip ID at 0xffffee40 --- get 0x819b05a2
-I- Found processor : at91sam9m10 (Chip ID : 0x819b05a2)
-I- External RAM Settings :  extRamVdd=0, extRamType=1, extRamDataBusWidth=16, extDDRamModel=0
-I- Loading applet isp-extram-at91sam9g45.bin at address 0x308000
-I- Memory Size : 0x8000000 bytes
-I- Buffer address : 0x3095A4
-I- Buffer size: 0x0 bytes
-I- Applet initialization done
-I- External RAM initialized
-I- Command line mode : Execute script file : at91sam9g45ekes_demo_linux_nandflash.tcl
-I- === Initialize the NAND access ===
-I- NANDFLASH::Init (trace level : 4)
-I- Loading applet isp-nandflash-at91sam9g45.bin at address 0x70000000
-I- Memory Size : 0x10000000 bytes
-I- Buffer address : 0x70003BE8
-I- Buffer size: 0x20000 bytes
-I- Applet initialization done
-I- === Erase all the NAND flash blocs and test the erasing ===
-I- GENERIC::EraseAll
-I- === Load the bootstrap: nandflash_at91sam9-ek in the first sector ===
GENERIC::SendFile nandflash_at91sam9g45ekes.bin at address 0x0
-I- File size : 0x1410 byte(s)
-I-    Writing: 0x1410 bytes at 0x0 (buffer addr : 0x70003BE8)