Home 
Forum
Forum
| Welcome to AT91SAM Community Forum http://www.at91.com/samphpbb/ |
|
| Compiling a Monitor http://www.at91.com/samphpbb/viewtopic.php?f=26&t=19541 |
Page 1 of 1 |
| Author: | xkenneth [ Thu Sep 09, 2010 2:24 pm ] |
| Post subject: | Compiling a Monitor |
Hi All, I was wondering if anyone had any details on how to compile a "monitor" for SAM-BA. We have a custom design that we've just revised and we're having some trouble communicating with the NAND-flash for some reason. The design does not have the pins or a connector for the JTAG debugger brought out so I can't debug or load code through this method. As far as I'm aware the only other way I can load "bare-metal" code onto the AT91SAM9261 is to load it as a "monitor" through SAM-BA. If that's the case I was hoping someone would have some detail on what's required to compile one. I attempted to compile a bit of code for the AT91SAM9261 with the Yagarto tool-chain on Windows 7 and I created a modified set of TCL files to load it into memory, however when I called the TCL_Go function all the device memory would reset to 0x0000. Thanks, Ken |
|
| Author: | xkenneth [ Thu Sep 23, 2010 5:51 am ] |
| Post subject: | Re: Compiling a Monitor |
All, Can anyone help me with this? How can I execute custom code on the AT91SAM9261 without a JTAG and only SAM-BA? Regards, Ken |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
