I am not able to load the linux demo on to the 9260-EK board. The Debug port displays >RomBOOT after a reset button press. I run the AT91SAM9260_demo_linux_NandFlash.bat.
The Linux demo does not install. The contents of the log file are:
-I- Waiting ...
connection : \usb\ARM0
board : AT91SAM9260-EK
target(handle) : 17952272
read chip ID : 0x00000010 at addr: 0xFFFFEE40
read chip ID : 0x019803A1 at addr: 0xFFFFF240
-I- Found processor : AT91SAM9260 (0x019803A0)
-I- Loading applet isp-extram-at91sam9260.bin at address 0x200000
-I- Memory Size : 0x4000000 bytes
-I- Buffer address : 0x2007C4
-I- Buffer size: 0x0 bytes
-I- Applet initialization done
-I- External RAM initialized
script file : AT91SAM9260_demo_linux_NandFlash.tcl
u-boot file: u-boot-env-nf.bin
diskSize: 0x00400000
-I- === Performs sanity checks===
-I- === Initialize the NAND access ===
-I- NANDFLASH::Init (trace level : 3)
-I- Loading applet isp-nandflash-at91sam9260.bin at address 0x20000000
-I- Memory Size : 0x10000000 bytes
-I- Buffer address : 0x200047E4
-I- Buffer size: 0x20000 bytes
-I- Applet initialization done
-I- === Erase all the NAND flash blocs and test the erasing ===
-E- Script File AT91SAM9260_demo_linux_NandFlash.tcl returned error : invalid command name "NANDFLASH::EraseSectorTest" - invalid command name "NANDFLASH::EraseSectorTest"
while executing
"NANDFLASH::EraseSectorTest"
(file "AT91SAM9260_demo_linux_NandFlash.tcl" line 144)
invoked from within
"source $scriptFile"

How do I fix this error?
Thanks,
Steve

The SAM-BA version is incompatible .
Uninstall it , and then install the version supplied with the 9260-ek CDROM.
that's "Install AT91-ISP v1.7.exe"

it hopefully, solves the problem.