All,

I have downloaded all three WINCE demo`s and followed the .ppt to the T
However the evaluation kit does not wnat to start the main application.
I look at the serial debug window:
all seems well !!!
OALTimerInit
+OALTimerInit
Master Clock is 90326820 Hz
Test : 0x160d
g_oalTimer.msecPerSysTick : 0x1
g_oalTimer.countsPerMSec : 0x160d
g_oalTimer.countsMargin : 0x0
g_oalTimer.maxPeriodMSec : 0xb8
g_oalTimer.countsPerSysTick : 0x160d
g_oalTimer.actualMSecPerSysTick : 0x1
g_oalTimer.actualCountsPerSysTick : 0x160d
g_oalTimer.curCounts : 0x0
Master Clock is 90326820 Hz
-OALTimerInit
pDrvGlobalArea->bEboot == TRUE. Forcing Clean Object store
+OEMPowerManagerInit
-OEMPowerManagerInit
OALKitlStart
Firmware Init Done.

until !!!! here then things goes WRONG ~~~

+OEMInitWatchDogTimer
AT91SAM926x_DispWatchDog 8000!
AT91SAM926x_SetWatchDogConfiguration 20000 => 5120
Clipping The Watchdog period to the maximum : 0xFFF (15996 ms)
-OEMInitWatchDogTimer (result = 15996)
Exception 'Prefetch Abort' (3): Thread-Id=00410002(pth=83eff024), Proc-Id=004000
02(pprc=818d8448) 'NK.EXE', VM-active=00400002(pprc=818d8448) 'NK.EXE'
PC=7f0a54d0(???+0x7f0a54d0) RA=c00a03e9(???+0xc00a03e9) SP=d001f9b0, BVA=7f0a54d
0
Exception 'Prefetch Abort' (3): Thread-Id=00410002(pth=83eff024), Proc-Id=004000
02(pprc=818d8448) 'NK.EXE', VM-active=00400002(pprc=818d8448) 'NK.EXE'
PC=00000000(???+0x00000000) RA=80078bc4(kernel.dll+0x0000dbc4) SP=d001f7dc, BVA=
00000000 ...........................................

Any advice !!!!!! Is the EK broken

Ben