Hi,

i have got AT91SAM9263-EK board. it is having a data flash card attached with it. i use a usb cable to connect the board with the windows pc. window is not detecting the h/w.

But when i removed the flash card from the board and then connect it again the h/w is detected by the window.

i am using windows 2000. i don't know why it is happening. please tell me the reason.


Another issue is, when i open samba 2.5 and choose the board as AT91SAM9263 and try to connect it, it is not opening the samba window and giving me the following error,

"Memory file not found, missing closing braces"


can anyone tell me the reason and the solution.


Thanks in advance

I've never used a flash card with the AT91SAM9263-EK eval board, but I have found that the board's detection by Windows is very sensitive to which version of AT91-ISP and SAM-BA you are using. Since I switched to AT91-ISP v1.12 and SAM-BA v2.8 (which required a downgrade), I have not had connection problems. Please let me know if this works for you.