Boot Data shows the board as :

Board : AT91SAM9G45-EK
Version: 1.0 (Sep 16 2009 - 14:18:03)

When I connect the DBGU Serial port to HyperTerminal and run SAM-BA V2.9 for Windows
Select the COM port and board AT91SAm9G45-EK (Note: AT91SAM9G45-EKES is not listed in drop down menu)

Sam-BA displays the Error Window

"No Valid Processor ID found"


Jumper Settings Default with JP10 (NANDCS) open, JP12 (NPCS0) closed

Also, After SAM-BA errors out, d6, d7 and d8 leds are blinking , When connected to HyperTerminal, it shows that LED test is running...
thanks

OK, Opening the JP12 jumper makes it connect to SAM-BA

Ye, I had a same problem last week. Open JP12&JP10. And probably is better to use Linux-SAMBA. I read some threads here that Win-SAMBA doesn't work with our board. And I really couldn't connect Win-SAMBA with the board. Linux-SAMBA works perfectly