Home 
Forum
Forum
| Welcome to AT91SAM Community Forum http://www.at91.com/samphpbb/ |
|
| AT91SAM9G45-EKES: New Touch http://www.at91.com/samphpbb/viewtopic.php?f=4&t=19061 |
Page 1 of 1 |
| Author: | Fnord [ Mon Mar 15, 2010 4:37 pm ] |
| Post subject: | AT91SAM9G45-EKES: New Touch |
Hello everybody, I am trying to add a bigger display and touchscreen to the AT91SAM9G45-EKES. I changed the file arch/arm/mach-at91/board-sam9m10g45ek.c in order to change the resolution of the attached display. This works fine, but I have no idea which file I have to change in order to get my touchscreen working. Can anybody help, please? With best regards Arthur D. |
|
| Author: | Fnord [ Tue Mar 16, 2010 4:19 pm ] |
| Post subject: | Re: AT91SAM9G45-EKES: New Touch |
Ok, thank you very much for your help, the touch is working now. Here is the next problem: My desktop is displaced. Any idea where I can change the settings to move it in the middle of the screen? Best regards A.D. |
|
| Author: | Fnord [ Wed Mar 24, 2010 10:06 am ] |
| Post subject: | Re: AT91SAM9G45-EKES: New Touch |
Thank you very much for your help, again. I changed some values in arch\arm\mach-at91\board-sam9m10g45ek.c and everything is working fine now. |
|
| Author: | Nu2ARM [ Wed Mar 24, 2010 9:05 pm ] |
| Post subject: | Re: AT91SAM9G45-EKES: New Touch |
Where did you connect you new display? Was it pin compatible to the existing display or you have to adapt it. I have been trying to do the same. |
|
| Author: | Fnord [ Mon Mar 29, 2010 9:51 am ] |
| Post subject: | Re: AT91SAM9G45-EKES: New Touch |
Hi, I removed the old display and connected the new one to J23, the touch panel to J18. The new display is not 100 % compatible to the old one, which isn't a problem. The new one has less connections for the colours so I started to connect the MSB of each colour down to the lower bits. |
|
| Author: | velik [ Mon Mar 29, 2010 1:36 pm ] |
| Post subject: | Re: AT91SAM9G45-EKES: New Touch |
Hi Fnord, I think this MCU/EKES is pretty new. Because of this you don't have answers on your questions. I have a same board, but with evaluation not so far as you But just ask a questions and write answers if you get no help here, because I take a mind all your answers for my future  Thank you |
|
| Author: | aton.camilo [ Mon Sep 26, 2011 3:42 am ] |
| Post subject: | Re: AT91SAM9G45-EKES: New Touch |
Hello! I'm new here and have a board AT91SAM9M10-G45-EK (with M10 processor). I would like to use a large LCD and touchscreen, the same as "Fnord" did in March/2010 (his last visit at community was one year ago). My concern is about LCD software changes, unfortunately Fnord didn´t say what settings he changed in "board-sam9m10g45ek.c" file. Could anyone give me a idea? Thanks for help. Aton |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
