1) SBC6045 Single Board Computer
http://www.armkits.com/Product/sbc6045.asp

- Dimensions: 82mm x 67mm (CPU board Mini6045, 8 layer PCB design),
185mm x 125mm (Expansion board)
- Power Supply: +5V (CPU Board), +12V~+36V (Expansion Board, supply DC12V power adapter as default, with isolation power)
- Working Temp.: -10~70°C
- Processor: 400MHz Atmel AT91SAM9G45 ARM926EJ-S Core Microprocessor
- 128MByte*2 DDR2 SDRAM
- 256MBbyte NAND Flash
- 4MByte Data Flash
- 2Kbit EEPROM
- Precise RTC (extended through DS3231SN)
- Watchdog timer, supported with the microprocessor
- One 40-pin LCD interface with 4-wire resistive touch screen interface (24-bit color LCD)
- One TF Card Slot
- One High-speed USB OTG 2.0 port (480Mps)
- One power indicator
- One system working status indicator
- Audio output port (supports playing MP3)
- One LVDS interface (Supports 8-bit LCD resolution up to 1280*860)
- 4-wire resistive touch screen interface
- Buzzer
- One 3-wire RS232 Debug serial port (Debug)
- One 3-wire RS232/RS485 (with isolation) serial port (COM0)
- One 5-wire RS232 serial port (COM1)
- One 3-wire RS232/RS485 (with isolation) serial port (COM2)
- One 3-wire RS232/TTL serial port (COM3)
- Two CAN 2.0 interfaces (extended through 2 SPI, with power and signal isolation)
- One High-speed USB 2.0 Host port, 480Mbps
- One 10/100Mbps Ethernet port (RJ45)
- One SDHC card slot (Hot plug-and-play)
- One TWI interface with speeds up to 400kbps
- One SPI interface
- One DC Power input port
- One Standard 20-pin JTAG interface
- One IO Button
- One Reset Button
- Ready-to-Run Linux 2.6.30 OS

2) SBC6245 Single Board Computer
http://www.armkits.com/Product/sbc6245.asp

- Power supply: +24V
- Working temperature: -10~70°C
- Processor: 400MHz Atmel AT91SAM9G45 ARM926EJ-S Core Microprocessor (compatible with AT91SAM9M10)
- 128Mbyte (64MB*2) DDR2 SDRAM
- 128Mbyte Nand Flash
- 1Kbit EEPROM (with encrytion)
- One 3-wire Debug serial port
- Two 5-wire RS232 serial ports (COM1 & COM2)
- Two RS485 serial ports (COM0 & COM3, with isolation)
- Two High-speed USB 2.0 Host ports, 480Mbps (One channel can be configured as Device)
- One 10M/100M Ethernet port (RJ45)
- TFT LCD interface (40-pin FPC connector, support resolution up to 1280*860 pixel)
- 4-wire resistive Touch screen interface
- RTC (battery backed)
- Buzzer
- One power indicator
- One system working status indicator
- Ready-to-Run Linux 2.6.30 and WinCE 6.0 OS

3) SBC6345 Single Board Computer
http://www.armkits.com/Product/sbc6345.asp

- Power supply: +24V
- Working temperature: -10~70°C
- Processor: 400MHz Atmel AT91SAM9G45 ARM926EJ-S Core Microprocessor (compatible with AT91SAM9M10)
- 128Mbyte (64MB*2) DDR2 SDRAM
- 128Mbyte Nand Flash
- 1Kbit EEPROM (with encrytion)
- One 3-wire Debug serial port
- One 3-wire RS232 serial ports (COM0)
- One 5-wire RS232 serial port (COM1)
- One 3-wire RS232 serial port (COM2, can be soldered as RS485 optional)
- One RS485 serial ports (COM3, with power and isolation)
- One-channel CAN2.0 bus
- Two High-speed USB 2.0 Host ports, 480Mbps (One channel can be configured as Device)
- One 10/100Mbps Ethernet port (RJ45)
- 24-bit LVDS LCD interface (CPU supports resolution up to 1280*860 pixel)
- 4-wire resistive Touch screen interface
- SD card slot
- Audio out (supports playing MP3)
- Buzzer
- Battery backed RTC
- 12V Power output interface
- One-channel external Watchdog function
- One power indicator
- One system working status indicator
- Ready-to-Run Linux 2.6.30 and WinCE 6.0 OS