Home 
Forum
Forum
| Welcome to AT91SAM Community Forum http://www.at91.com/samphpbb/ |
|
| Error while flashing from Samba for linux on SAM9G25-EK http://www.at91.com/samphpbb/viewtopic.php?f=4&t=20428 |
Page 1 of 1 |
| Author: | ste.ghi [ Tue Oct 04, 2011 11:42 pm ] |
| Post subject: | Error while flashing from Samba for linux on SAM9G25-EK |
Hi all, I installed SAM-BA 2.10 for linux (running on Ubuntu 11.04 amd_64) and I successfully connected to my SAM9G25 EK with samba-gui. I then tried to upload the demo archive linux4sam-angstrom-net-at91sam9x5ek.zip that I found on: http://www.at91.com/linux4sam/bin/view/ ... tarted_9x5 but after executing the .tcl script I get the following message: SAM-BA CDC console display active (Tcl8.4.17 / Tk8.4.17) (SAM-BA v2.10) 1 % (SAM-BA v2.10) 1 % Execute Script File ... -I- === Initialize the NAND access === -I- NANDFLASH::Init (trace level : 4) -I- Loading applet isp-nandflash-sam9g25.bin at address 0x20000000 -I- Memory Size : 0x10000000 bytes -I- Buffer address : 0x20010964 -I- Buffer size: 0x20000 bytes -I- Applet initialization done - By default PMECC is activated, - By default, The pmecc computation is based on a sector of 512 bytes, - By default, correcting capability for pmecc is retrieved from ONFI parameter, - By default, offset of the first ecc byte in spare zone is '2', - To config pmecc parameter, using 'NANDFLASH::SetNandHeaderValue pmeccParam pmeccParamValue' command, - Type 'NANDFLASH::SetNandHeaderValue ' to dispaly current pmecc configuration. - Type 'NANDFLASH::SetNandHeaderValue ?' to get help for pmecc setting, - To active software ECC, using 'Enable Software ECC' command, - Recommand to erase all after the ecc mode switch between software ECC & pmecc. -I- === Enable PMECC OS Parameters === -E- Script error: invalid command name "bootheaderDialg" (SAM-BA v2.10) 1 % I checked for the string "bootheaderDialg" and it can be found in the patch sam-ba-2.10-sam9g15_g25_g35_x25_x35_patch_1.0.zip, file tcl_lib/common/generic.tcl. What is going wrong? Thanks for your help! Stefano |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
