Hello,

yesterday i start to program my new At91S256 with the Board from Olimex, the ARM-USB-OCD and the description "Using Open Source Tools for AT91SAM7S Cross Development revision C"

With success, the LED was blinking!
After this i cleared the flash with the TOOL SAM-BA from ATMEL!

Now.....nothing is working anymore! Why
When i start the progress in Ecplise to program my Flash Memory i get this message:

make -k program
Flash Programming with OpenOCD...
'C:/Programme/openocd-2007re141/bin/'openocd-ftd2xx.exe -f 'C:/Programme/openocd-2007re141/bin/'at91sam7s256-armusbocd-flash-program.cfg # program the onchip FLASH here
Info: openocd.c:86 main(): Open On-Chip Debugger (2007-04-16 19:30 CEST)
Error: jtag.c:1230 jtag_examine_chain(): number of discovered devices in JTAG chain (578) doesn't match configuration (1)
make: *** [program] Error -1



Does anyone have an idea what i can do now?

Best Regards and Thank you.

Tobi