The EVBsam7s board was created with the aim of providing a hardware base for a designer of systems relying on the MMsam7s minimodule, allowing to realize and verify quickly one's own ideas. Having this in mind, the board has been designed in such a way that the user has access to all terminals of the module which are led out to connectors. The board houses also such peripherals as: LEDs, push-buttons, potentiometers, a LCD display (optional), two RS232 interfaces, USB connector and 1-Wire connector. All these elements are accessible through pin connectors, permitting their connection with any processor port. The board has also a large prototype area which permits the designer to connect other elements in any configuration. Due to the incision (v-cut) between the prototype area and the rest of the board, the prototype part can be broken off. The board contains also a power supply which relieves the user from the need to provide a regulated supply voltage.
Together with the board, we deliver development tools as well as demonstration software.
The EVBsam7s along with the MMsam7s minimodule can be also used in didactic laboratories of informatics colleges and universities. It can be also used to build circuits realizing thesis projects.
* Socket for the MMsam7s module
* Connector with all terminals of the MMsam7s module
* Connectors of all peripherals accessible on board
* Power supply
* Power switch
* USB connector
* Two RS232 ports
* 1-Wire connector
* JTAG connector for in system programming and debugging
* Connector for 2x16 LCD display
* SD/MMC card connector
* 8 LED diodes
* 4 push-buttons
* 2 potentiometers
* Buzzer
* Prototype design area
* Supports SAM-BA bootloader
http://www.propox.com
Forum
