Hi friends,
i am able to successfully see the network statistics in the hyperterminal window on my system after deploying the emac sample on the AT91SAM9263EK board.
-- Basic EMAC lwIP Project 1.4 --
- MAC 23:45:56:78:9a:bc
- Host IP 10.159.245.156
- Gateway IP 10.159.245.157
- Net Mask 255.255.254.0
But, when i connect the board to the workstation with static ip assignment and same gateways and subnet mask settings,

- IP 10.159.245.160
- Gateway IP 10.159.245.157
- Net Mask 255.255.254.0

i am unable to open http://10.159.245.156 Can anyone point me to the right appraoch to be followed over here. I do not have the cable which came with the board and have tried a simple network cable and a cross/twisted pair RJ45 cat6 cable also......

Thanks,
Suz