Atmel website | ARM Community | AVR freaks | Technical Support
Banner
 FAQ •  Search •  Register •  Login 

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: The ARM9 Core Board for Atmel AT91SAM9G20
PostPosted: Fri Jul 09, 2010 9:16 am 
Offline

Joined: Wed Nov 18, 2009 11:35 am
Posts: 13
There is an arm9 core board that I would like to introduce to all of you, please check it out as follows:

The Embest MBC-SAM9G20 Core Board, measuring 45mm x 52mm, is a very small size, low power consumption but high performance arm9 based processor board. It is based on an ATMEL AT91SAM9G20 ARM926EJ-S core based microprocessor, with 64KB ROM and 16KB SRAM on-chip memories. The board features a Micro USB port, a Debug UART port, a 5V power port and comprehensive external memories: 4MB DataFlash,256MB NandFlash,64KB EEPROM and 64MB SDRAM. It is so tiny that it can reduce much space of your products. You can use it easily to complete your project development and save much of your time to the market.

Features
- Processor: Atmel AT91SAM9G20 ( based on ARM926EJ-S Core), 400MHz
* 32 KBytes Data Cache, 32 KBytes Instruction Cache, with MMU

* Internal memory: one 64KB ROM and one 16KB SRAM
- External memory: 4MB DataFlash,256MB NandFlash,64KB EEPROM and 64MB SDRAM
- One Micro USB connector
- One UART Serial Port (TTL Level)
- OS: Preinstalled Linux2.6, support WinCE6.0 (BSP, optional)
- Power supply: 5V
- Temperature range: -20 to +70 Celsius
- The module is led out most signals of Atmel AT91SAM9G20, like UART, Ethernet, LCD, Touch Screen, USB Host, USB Device, ADC, DAC, SPI, SDIO, GPIO and so on.

Mechanical Parameter
- Dimension: 45mm x 52mm x 11mm (Length x Width x Thickness)
- Base Board Connector
* Interface type: QSH-060-01-X-D-A
* Dimension: 42.3mm x 8.6mm x 0.5mm (Length x Width x Thickness)
* Pins gap: 0.5mm
* Pins: 120
- PCB layers: 8
- Power supply: 5V DC or powered by base board.
- Weight: 15.4g

For more information about Embest MBC-SAM9G20 Core Board, please refer tohttp://www.samicc.com/2010/0521/35.html.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron