Atmel website | ARM Community | AVR freaks | Technical Support
Banner
 FAQ •  Search •  Register •  Login 

View unanswered posts | View active topics


Board index » PRODUCTS » SAM9 ARM9 MPU

All times are UTC + 1 hour [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 26 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
doerte
 Post subject: The patch again
PostPosted: Fri Sep 01, 2006 8:54 am 
Offline

Joined: Thu Sep 01, 2005 9:29 am
Posts: 7
Location: Berlin, Germany
Here comes the patch again.
Best regards
doerte
Top
 Profile  
 
ashsihdabhikar
 Post subject: Want the patch
PostPosted: Mon Apr 16, 2007 2:29 pm 
Offline

Joined: Mon Apr 16, 2007 2:05 pm
Posts: 1
I am new to the forum.

I just ported u-boot for a FPGA board. Now I am trying a SD card support to it.
Can you please give me the patch.

Thanks in advance
:)
Top
 Profile  
 
l_summons
 Post subject:
PostPosted: Tue Apr 17, 2007 1:17 pm 
Offline

Joined: Tue Apr 17, 2007 10:56 am
Posts: 3
Location: Berlin
Wow .. if there is a patch for u-boot using which enables the SD-Card I would really appreciate to have it, too.
Top
 Profile  
 
psa
 Post subject:
PostPosted: Thu Aug 16, 2007 4:41 pm 
Offline

Joined: Tue Jul 10, 2007 1:15 pm
Posts: 25
Location: Rennes
Somebody have a patch to apply at U-Boot??? Because I haven't any mmc.c or mmc.h after apply the atmel patch on the 1.1.5 version. Somebody could help me please ?

Thanks in advance.

Pierre
Top
 Profile  
 
roger_yu
 Post subject: Re: Patch
PostPosted: Sat May 24, 2008 8:58 am 
Offline

Joined: Tue Jul 03, 2007 3:24 pm
Posts: 1
Location: china
doerte wrote:
Hello,

here comes the patch. It enables u-boot to read from a SD-Card

Please download the u-boot-1.1.3 tar ball from sourceforge.net, untar it and apply the attached patch, which was unzipped into the directory in which u-boot-1.1.3 lies.

patch -p0 < u-boot-1.1.3.at91rm9200_mmc.patch

If the u-boot is up and running you have to enter mmcinit. If running successfull - You may use all fat based commands, like

    fatls mmc 0
    fatload mmc 0:1 21000000 uimage
Doerte

PS.: I am using the scratchbox-toolchain-arm-gcc3.4.cs- 0.9.8.5 arm-linux-gcc3.4.cs-glibc2.3-nofpu compiler for Scratchbox.
Top
 Profile  
 
lewing
 Post subject:
PostPosted: Mon Jun 16, 2008 11:23 am 
Offline

Joined: Fri Sep 14, 2007 12:43 pm
Posts: 2
Location: Vienna
can someone send me the patch for SD-Card support for u-boot?

thx
Matthias
Top
 Profile  
 
jw@terrafix.co.uk
 Post subject: Re: MMC/SDCard support in U-Boot
PostPosted: Wed Jul 08, 2009 9:06 am 
Offline

Joined: Fri Jul 03, 2009 12:36 pm
Posts: 1
Do this patch still exist? And if so how would I go about getting hold of it?

Cheers,
Joe
Top
 Profile  
 
barde
 Post subject: Re: MMC/SDCard support in U-Boot
PostPosted: Fri May 13, 2011 3:12 pm 
Offline

Joined: Fri May 13, 2011 2:53 pm
Posts: 1
I try to add mmc commands to my U-BOOT (1.3.4, but I see that these commands are not present also in last version) in order to test the sd card in my board based on at91sam9263.

Is this patch the correct way? And where is this patch? Because I download the version 1.1.3 from SourceForge, like indicated in the "doerte" post, but there is any patch about mmc...

Any help is greatly appreciated...

Thanks a lot, Valerio
Top
 Profile  
 
NITIN BHASKAR
 Post subject: Re: MMC/SDCard support in U-Boot
PostPosted: Fri May 27, 2011 7:14 am 
Offline

Joined: Wed May 25, 2011 10:56 am
Posts: 1
Where is the patch?????

Thanks
Nitin
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 26 posts ]  Go to page Previous  1, 2

Board index » PRODUCTS » SAM9 ARM9 MPU

All times are UTC + 1 hour [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: