Welcome to AT91SAM Community Forum :: View topic - Can not flash the nand flash of AT91SAM9M10-G45-EK

Welcome to AT91SAM Community Forum http://www.at91.com/samphpbb/

Can not flash the nand flash of AT91SAM9M10-G45-EK http://www.at91.com/samphpbb/viewtopic.php?f=9&t=19522	Page 1 of 1

Author:	kwokwong [ Wed Sep 01, 2010 4:21 pm ]
Post subject:	Can not flash the nand flash of AT91SAM9M10-G45-EK
Hi, I failed to flash the Android demo on this evaluation kit using the below instructions: http://www.at91.com/android4sam/bin/vie ... eBuildDemo Using the default flash script, the sam-ba tool reports: "Board at91sam9g45-ek not found" After changeing the board id to "at91sam9m10-45ek", the sam-ba tool reports: "No valid processor ID found" Any one helps? Kwok P.S. I used serial connection when using sam-ba

Author:	kwokwong [ Thu Sep 02, 2010 4:35 pm ]
Post subject:	Re: Can not flash the nand flash of AT91SAM9M10-G45-EK
[SOLVED} Atmel: Before to launch SAM-BA you have to send a specific sequence to the ROM code through the serial port. Open an hyperterminal (or any other application) and type the following character sequence: €€##

Page 1 of 1	All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/