Hello all,

For one of our project, I intend to use the AT91RM9200 and installing linux on it.
I have a few basics because I already installed uClinux with uBoot on a Coldfire (without any apps or device drivers).

We will firstly buy the AT91RM9200DK and we have a Linux workstation too.
My first question is : What do I need to buy more in order to install uBoot, then Linux, then device drivers, then user apps ?

I read an interessant message from SmithAdmin which some links to :
kernel.org for the kernel
arm.linux.org.uk for the AT91RM9200 device drivers and patches
and a few other links.

My problem is that I didn't find any patch or device drivers for the AT91RM9200DK on this site.
Is there any existing Linux device driver for the Ethernet, Serial link and USB host and device. I suppose yes but where can I find it?

I know that there is a BSP provided by ATMEL for the AT91RM9200DK. Is it possible to modify it and to use it for a custom app ?

Thank you for any answer

Hi jeanlee,
try google and use the following: "site:lists.arm.linux.org.uk at91 patch"

You can also find informations about it at:
http://lists.arm.linux.org.uk/pipermail ... 21023.html

Best regards,
Edi

Hello jeanlee,

You can modifiy and use the Atmel Linux distribution (including kernel and ramdisk) according to your needs.
Have you got a look on the AT91 forum? The last Atmel linux distribution is available.
http://www.at91.com/www/phpBB2/viewtopic.php4?t=322

Ciao
nat