AT91RM9200: Tool for making traces over ETM

arm99er · **Joined:** Thu Nov 18, 2004 3:10 pm **Posts:** 4

Hi everbody.

just I'm looking for a tool to make traces of the AT91RM9200 over the ETM interface. I tested some tools already but I found different problems.

Has somebody made already some experiences in making such traces using the Cogent board CSB337 or any other board?

Has someone a recommendation which tool works fine?

Thank you.

Greetings,
arm99er

JPP · **Posted:** Mon Dec 20, 2004 4:41 pm

HI

I have worked on the DK board under trace tools system.
Can I help you?
jpp

arm99er · **Joined:** Thu Nov 18, 2004 3:10 pm **Posts:** 4

Hi,

some of the different problems came from my less knowledge of the ETM part of the AT91RM9200. They are solved now.

What I'm interested in is which experience you've made with the tools you've tested? Which tool (Lauterbach, Hitex, iSystem, Green Hills, Nohau,...) have you checked and makes "fine" traces and has a good user interface.

Thanks.

arm99er

AT91RM9200: Tool for making traces over ETM

Who is online