Hello

Is there any example project/sourcecode for the AT91RM9200-EK board using IAR Embedded Workbench available?

/Johnny

johnny@eneye.se
ICQ:3965856

Hello,

you will find a software example for the RM9200-DK for the IAR IDE at the following address:
ftp://at91supp:support@81.80.104.162/OUT/IAR/, file AT91RM9200-BasicTools-IAR4_11A-1_1.zip

This software example has been build for the RM9200-DK, so you will probably have to adapt the initialization files for the RM9200-EK. But, it should help you to get started.
For info, I have checked this software package with the RM9200-EK and you can use it "AS IS" if you want to debug in internal RAM by selecting the workspace Debug 0x200000.
If you want to debug from internal SDRAM using the workspace Debug 0x20000000, you have to adapt it to the SDRAM available on the RM9200-EK board.

Hope this help.

Rgds
JP

Thank you for the help. It works fine when downloading and debugging using internal ram. Is it possible to download to program flash and debug using IAR and J-Link JTAG?

/Johnny